We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six clear rigid PETG tubes, 30 inches each

PrimoChill

PrimoChill 5/8in Rigid PETG Tube 6 x 30in Clear

SKU CH-9655-8H21T

Clear rigid PETG tubing for custom water-cooling loops, six 30-inch lengths with 1/2-inch inner diameter and 5/8-inch outer diameter

  • TypeCPU Block
  • Enables tight bends without extra fittings saving build time
  • Thicker wall than acrylic tubing for safer operation
  • Made in the USA ensuring trusted brand quality
  • Non-toxic environmentally responsible material safe for all builds
  • Pack of six 30-inch tubes ready to measure cut bend install

PrimoChill 5/8in Rigid PETG Tube Clear

This PrimoChill 5/8in rigid PETG tubing suits performance enthusiasts and case modders building custom watercooling loops. The clear tubing enables tight bends and straight runs while reducing the need for excessive compression fittings or 90 degree angle rotaries. It is made in the USA with thicker walls for safer operation and is environmentally responsible, safe, and non-toxic. The pack contains six pieces of 30 inch tube.

Before ordering check fitting compatibility

Verify that your existing loop uses 5/8in OD rigid fittings matching the tubing outer diameter of 5/8in with a tolerance of ±.005 and an inner diameter of 1/2in ±.005. Ensure you have the tools and technique to measure, cut, and bend PETG tubing to the required shapes. Confirm that your coolant choice and flow rates are compatible with PETG material to avoid appearance changes.

Upgrades from acrylic tubing

This PETG tubing replaces acrylic tubing by offering superior strength and easier bending without the same risk of cracking. The thicker wall provides safer operation under pressure. The jump is worth it for builders who want tighter bends, fewer specialised fittings, and a more forgiving installation process while keeping a clear aesthetic.

Highlights

  • Enables tight bends without extra fittings saving build time
  • Thicker wall than acrylic tubing for safer operation
  • Made in the USA ensuring trusted brand quality
  • Non-toxic environmentally responsible material safe for all builds
  • Pack of six 30-inch tubes ready to measure cut bend install

Specifications

TypeCPU Block

Questions about this item

What comes in the box and which fittings must be purchased separately?

The package contains six clear PETG tubes, each 30in long with a 5/8in outer diameter and 1/2in inner diameter. You will need 5/8in OD rigid fittings to complete the loop.

Which tube size matches the 5/8in OD specification shown in the listing?

The listed tubes have a 5/8in outer diameter, 1/2in inner diameter and 1/16in wall thickness, so choose 5/8in OD rigid fittings for a direct fit.

What does the 5/8in OD figure mean once the tubing is installed in a custom loop?

It sets the required fitting size; the 1/2in inner diameter and 1/16in wall give a rigid run that holds tight bends without extra 90-degree rotaries.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.