We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two silver aluminium wheel spacers 1.5 inch thick 4x137 bolt pattern 10x1.25 studs

Precision European Motorwerks

Precision European Motorwerks wheel spacers 4x137 1.5" 10x1.25 V3

SKU CH-HQEJ-ZE717

Two 1.5" thick 4x137 wheel spacers with 10x1.25 studs, CNC-machined from aerospace billet aluminium and anodised for corrosion resistance

  • ColorSilver
  • Widens track by 1.5" for stability
  • CNC-machined aerospace billet aluminium construction
  • Anodized finish resists corrosion and rust
  • Fits 4x137 bolt pattern with 110mm hub bore
  • Includes M10x1.25 studs for direct installation

Precision European Motorwerks 4x137 wheel spacers

These 1.5 inch thick aluminium spacers fit ATVs and UTVs with a 4x137 bolt pattern and M10x1.25 studs. The set includes two CNC machined pieces anodised for corrosion resistance. They are designed for machines where the hub centre bore does not exceed 110mm.

Bolt pattern and stud compatibility limits

Fitment requires an exact 4x137 bolt pattern and 10x1.25mm wheel studs on the vehicle. The hub lip must measure 110mm or less for the spacer to seat correctly. Verify these three measurements on your machine before installation.

1.5 inch thickness sets track width increase

Each spacer adds 38mm of offset per wheel, widening the stance for stability or tyre clearance. This fixed thickness cannot be adjusted or stacked safely. Choose this set only when the build calls for a 1.5 inch increase on a compatible 4x137 hub.

Highlights

  • Widens track by 1.5" for stability
  • CNC-machined aerospace billet aluminium construction
  • Anodized finish resists corrosion and rust
  • Fits 4x137 bolt pattern with 110mm hub bore
  • Includes M10x1.25 studs for direct installation

Specifications

BrandRockTrix
ColorSilver

Questions about this item

Which thickness should I choose for my ATV?

These spacers are 1.5 inches or 38 mm thick; select this width when you need that exact track increase and your wheel studs are M10x1.25 with a 4x137 bolt pattern.

What does the 4x137 bolt pattern mean on my machine?

It means four studs spaced on a 137 mm circle; the spacer will only bolt up if your hub matches that pattern and the centre bore is no larger than 110 mm.

Will the 10x1.25 stud thread work with my factory lug nuts?

Yes, the spacers come with M10x1.25 studs, so your existing lug nuts of the same thread pitch will thread on directly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.