We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of silver 4x110 wheel spacers 1.0 inch thick 74.1mm centre bore 10x1.25 studs

Precision European Motorwerks

Precision European Motorwerks wheel spacers 2pc 1.0" 4x110 74.1mm 10x1.25

SKU CH-7C69-MVJZ0

Pack of two 1.0 inch thick 4x110 wheel spacers with 74.1 mm centre bore and 10x1.25 studs for compatible ATV and UTV models

  • Widens stance by 1.0 inch per wheel
  • 4x110 bolt pattern matches many ATV hubs
  • 1 mm centre bore centres on hub
  • 10x1.25 studs and nuts included
  • Fits listed Honda Yamaha Kawasaki Suzuki models

1.0-inch wheel spacers for 4x110 bolt pattern

These Precision European Motorwerks spacers add 1.0 inch of track width per side on ATVs and UTVs that run a 4x110 bolt pattern with a 74.1 mm centre bore. They are sold as a pair and use 10x1.25 studs and nuts. The parts are new and intended for off-road machines that match the listed thread size.

Fitment depends on confirming 10x1.25 studs

Installation requires the vehicle to have 10x1.25 wheel studs; any other thread size will not work. The spacers sit between the hub and the wheel, pushing the tyre outward for extra stability and clearance. No other hardware changes are needed when the stud size matches.

Suited to riders with verified 10x1.25 fitment

Buyers who can confirm their machine uses 10x1.25 studs and a 4x110 pattern will gain the wider stance these spacers provide. Owners of models with different stud threads or bolt patterns cannot use this set and should look for spacers that match their specific hardware.

Highlights

  • Widens stance by 1.0 inch per wheel
  • 4x110 bolt pattern matches many ATV hubs
  • 1 mm centre bore centres on hub
  • 10x1.25 studs and nuts included
  • Fits listed Honda Yamaha Kawasaki Suzuki models

Specifications

No published specifications for this item yet.

Questions about this item

How much wider does the 1.0" thickness push the wheel out on each side?

Each spacer adds 25 mm of offset, moving the wheel 1.0 inch farther from the hub on that corner.

Will the 74.1 mm centerbore and 10x1.25 studs handle daily trail heat without loosening?

The spacers use 10x1.25 grade-8 studs and a 74.1 mm hub-centric bore; torque them to spec and re-check after the first ride to keep clamp load stable under heat cycles.

My ATV must already have which bolt pattern and stud thread for these to bolt on?

The machine needs a 4x110 bolt pattern and 10x1.25 wheel studs — any other pattern or thread size will not fit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.