Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00081597BTC
In stock
Precision European Motorwerks
Precision European Motorwerks 5mm Hubcentric 5x114.3 Wheel Spacers 67.1mm Bore 2 Pack accessories - wheel
Two 5 mm hub-centric wheel spacers with a 5×114.3 bolt pattern and 67.1 mm centre bore for wider track width
- ColorSilver
- 5 mm thickness gives a subtle stance improvement
- hub-centric 67.1 mm bore centres the wheel on the hub
- 5 × 114.3 bolt pattern fits many Mazda, Hyundai, Genesis, Kia, Mitsubishi and Jeep models
- two spacers included for a complete axle upgrade
- silver finish resists corrosion for lasting appearance
Precision 5 mm hubcentric spacers for 5x114.3 bolt
These 5 mm thick aluminium spacers centre the wheel on the vehicle's 67.1 mm hub bore using a hubcentric design. They suit cars listed with a 5x114.3 bolt pattern such as certain Mazda, Hyundai, Genesis, Kia, Mitsubishi and Jeep models. The pack contains two spacers for a single axle.
Hubcentric fit centres the wheel on the hub lip
Each spacer has no lip, so the wheel seats directly on the vehicle hub provided the hub lip exceeds 5 mm in length. Correct thread engagement requires the existing studs or bolts to be long enough, or aftermarket extended lug bolts or studs which are not included. Verify 5 mm of fender clearance before fitting.
5 mm thickness sets the clearance limit
The single critical dimension is the 5 mm spacer width; it determines whether the wheel and tyre clear the fender and whether the factory fasteners retain safe thread depth. Buyers needing more than 5 mm of offset or a different bolt pattern or centre bore cannot use this kit.
Highlights
- 5 mm thickness gives a subtle stance improvement
- hub-centric 67.1 mm bore centres the wheel on the hub
- 5 × 114.3 bolt pattern fits many Mazda, Hyundai, Genesis, Kia, Mitsubishi and Jeep models
- two spacers included for a complete axle upgrade
- silver finish resists corrosion for lasting appearance
Specifications
| Brand | StanceMagic |
|---|---|
| Color | Silver |
Questions about this item
Does the 5x114.3 bolt pattern limit the spacer to a specific wheel offset?
The 5x114.3 pattern matches the hub; offset change equals the 5mm thickness, so confirm 5mm clearance to the fender and that studs allow full thread engagement.
Will the 67.1mm centre bore fit my hub without an adapter ring?
Yes, the spacer is hub-centric at 67.1mm; it centres on the hub lip provided that lip exceeds 5mm in height.
Do I need longer bolts or studs for a 5mm spacer, and what is the common mistake?
Extended lug bolts or studs are required but not included; the frequent error is reusing original hardware, which leaves insufficient thread engagement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
