We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four silver anodised aluminium wheel spacers, 1 inch thick with 4x137 bolt pattern

Precision European Motorwerks

Precision European Motorwerks 1.0" 4x137 ATV Wheel Spacers 10x1.25 Silver (Set of 4)

SKU CH-C8QV-N7H0Q

Set of four 1.0" thick wheel spacers with 4x137 bolt pattern, 110mm hub bore and 10x1.25 studs for compatible ATV and UTV models

  • ColorSilver
  • Wider stance improves stability with 1.0" (25mm) thickness
  • Four-spacer set fits 4x137 bolt pattern vehicles
  • CNC-machined aerospace billet aluminium resists corrosion
  • 110mm hub bore matches compatible ATV and UTV hubs
  • M10x1.25 thread pitch suits specified wheel studs

1.0" 4x137 ATV Wheel Spacers

Precision European Motorwerks supplies a set of four silver anodised spacers machined from aerospace billet aluminium. Each spacer is 1.0" (25mm) thick and drilled for a 4x137 bolt pattern with a 110mm hub centre bore. The kit is intended for ATV, UTV and side-by-side owners who need extra track width or clearance.

10x1.25 stud thread requirement

Fitment depends entirely on the vehicle having M10x1.25 wheel studs; any other thread pitch will not work. The spacers also require a hub lip not larger than 110mm and a 4x137 bolt pattern, so verifying those three measurements on the machine is mandatory before installation.

Suits owners of listed Kawasaki Can-Am Bombardier

The spacers match the bolt pattern, hub bore and stud size of specific Kawasaki Brute Force Mule Prairie, Can-Am Commander Maverick Outlander Renegade, Bombardier Outlander and Suzuki Twin Peaks models ranging from 300 to 1000. Buyers whose machines use a different bolt pattern, larger hub bore or alternative stud thread should look at other spacer kits.

Highlights

  • Wider stance improves stability with 1.0" (25mm) thickness
  • Four-spacer set fits 4x137 bolt pattern vehicles
  • CNC-machined aerospace billet aluminium resists corrosion
  • 110mm hub bore matches compatible ATV and UTV hubs
  • M10x1.25 thread pitch suits specified wheel studs

Specifications

BrandRockTrix
ColorSilver

Questions about this item

How much wider will the track become once these 1.0" spacers are bolted on?

Each spacer adds 25mm of offset, so the overall track width increases by 25mm per wheel.

What bolt pattern and stud thread do these spacers require?

They are drilled for a 4x137 bolt pattern and accept M10x1.25 wheel studs.

What is the largest hub centre bore these 110mm spacers will clear?

The spacer centre bore is 110mm, so the vehicle hub lip must not exceed 110mm in diameter.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.