We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver dual-action airbrush with gravity-feed cup and MAC valve

POINTZERO

POINTZERO PZ-406 Dual-Action Airbrush Set .2mm Nozzle

SKU CH-8ZVH-1CP28

A dual-action gravity-feed airbrush with a .2 mm nozzle and Micro Air Control valve for on-the-fly pressure adjustment

  • Craft TypeCraft Accessories
  • ColorSilver
  • Dual-action trigger gives independent air and fluid control
  • Micro Air Control valve adjusts pressure on the fly
  • Needle backstop pre-sets trigger travel for consistent lines
  • .2 mm nozzle enables hairline to 1-inch spray patterns
  • Gravity-feed 9 cc cup with lid holds ample paint

Precision Airbrush for Fine Detail

The POINTZERO PZ-406 is a dual-action, internal-mix airbrush designed for artists and hobbyists who need exact control over paint flow and spray pattern. Its 0.2 mm nozzle produces razor-sharp detail suitable for illustration, model finishing and custom graphics. The balanced, precision-crafted body reduces fatigue during extended sessions.

Consistent Flow with On-the-Fly Adjustment

A Micro Air Control valve sits below the colour cup, allowing instant micro-adjustment of air pressure without reaching for the compressor. The needle backstop pre-sets trigger travel so line widths stay repeatable pass after pass. Solvent-resistant needle packing and a stainless-steel needle minimise tip-dry across all common spraying mediums.

Compact Gravity-Feed Kit for Tight Workspaces

The 9 cc gravity cup with lid feeds material directly into the mix chamber, eliminating the need for a bulky side-feed bottle and freeing up bench space. A crenelated needle cap lets the tip sit millimetres from the surface for hairline work, while the cutaway handle gives quick access to the needle chuck for cleaning between colours.

Highlights

  • Dual-action trigger gives independent air and fluid control
  • Micro Air Control valve adjusts pressure on the fly
  • Needle backstop pre-sets trigger travel for consistent lines
  • .2 mm nozzle enables hairline to 1-inch spray patterns
  • Gravity-feed 9 cc cup with lid holds ample paint

Specifications

BrandPointZero
Craft TypeCraft Accessories
ColorSilver

Questions about this item

How do I install the .2mm nozzle on the PZ-406 and what step causes leaks?

The .2mm nozzle comes pre-installed. When removing it for cleaning, the step people get wrong is not tightening the nozzle cap fully after reassembly; a loose cap lets air bypass the tip and breaks the spray pattern.

What maintenance will the PZ-406 dual-action airbrush need later?

Clean the fluid path after every session to prevent tip-dry on the stainless-steel needle. The solvent-resistant needle packing and MAC valve are designed for long life with all spraying mediums and do not have a scheduled replacement interval.

What limit shows up first on the PZ-406 during sustained spraying?

The 9cc gravity-feed cup empties quickly under continuous use, forcing frequent refills before the MAC valve or needle packing reach any thermal or wear limit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.