We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver dual-action gravity-feed airbrush with .2 mm nozzle .5 cc cup MAC valve and cutaway handle

POINTZERO

POINTZERO PZ-402-FT .2 mm .5 cc Gravity-Feed Airbrush Set

SKU CH-W41C-DWQ5J

Dual-action gravity-feed airbrush with .2 mm nozzle, .5 cc cup and MAC valve for on-the-fly pressure control

  • Craft TypeCraft Accessories
  • ColorSilver
  • Dual-action trigger gives independent air and fluid control
  • Micro Air Control valve enables on-the-fly pressure adjustment
  • Needle backstop produces consistent line widths
  • Precision 0.2 mm nozzle atomizes fine detail
  • 5 cc gravity cup stays clear of sightline

Precision Airbrush for Detail Work

The POINTZERO PZ-402-FT is a dual-action gravity-feed airbrush built for fine detail across hobby, craft and illustration work. Its 0.2 mm nozzle produces spray patterns from hairline up to one inch. A 0.5 cc flush-design cup sits low to keep sight lines clear. The internal-mix design lets the trigger control air and fluid independently for precise handling.

MAC Valve and Balanced Build

A Micro Air Control valve sits below the cup for on-the-fly pressure tweaks without reaching for the compressor. The precision-machined body balances well in hand during long sessions. Stainless-steel needle and solvent-resistant packing tolerate a wide range of media. Cutaway handle gives quick access to the needle chuck for cleaning or changes. Standard 1/8 inch BSP fitting connects to common hoses.

Check Compressor and Media Prep

Verify your compressor can deliver steady low pressure suitable for a 0.2 mm tip. Ensure you have a hose with 1/8 inch BSP threads or an adapter. Prepare thinning ratios for your chosen paints; the tiny cup holds only 0.5 cc so plan refill intervals. The set includes a barbed connector, pipette and nozzle wrench for immediate setup.

Highlights

  • Dual-action trigger gives independent air and fluid control
  • Micro Air Control valve enables on-the-fly pressure adjustment
  • Needle backstop produces consistent line widths
  • Precision 0.2 mm nozzle atomizes fine detail
  • 5 cc gravity cup stays clear of sightline

Specifications

BrandPointZero
Craft TypeCraft Accessories
ColorSilver

Questions about this item

What does the 1/8" BSP fitting on the PZ-402-FT connect to?

The standard 1/8" BSP thread screws directly onto most airbrush hoses and compressor outlets without an adapter.

Will the .5 cc gravity cup and cutaway handle clear my work surface?

The flush-design .5 cc cup sits low and the cutaway handle gives finger room, so the airbrush clears the surface for fine detail.

How do I set the needle backstop on this dual-action airbrush without jamming the trigger?

Screw the backstop in until the trigger pull stops at your desired paint flow, then lock it; do not force the trigger past the stop.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.