We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver dual-action gravity-feed airbrush with 2cc cup and three tip sizes

POINTZERO

POINTZERO PZ-270XS Dual-Action 2cc Gravity-feed Airbrush .2 .3 .5mm Set

SKU CH-TWSN-A445B

A dual-action gravity-feed airbrush with interchangeable .2, .3 and .5 mm tips for spray patterns up to 1.75 inches, operating at 15 to 50 psi

  • Craft TypeCraft Accessories
  • ColorSilver
  • Dual-action trigger gives independent air and fluid control
  • Three tip sizes (.2 .3 .5 mm) cover hairline to 1.75" patterns
  • Gravity-feed 2 cc cup keeps view clear for detail work
  • Needle backstop pre-sets trigger travel for consistent line widths
  • Stainless-steel needle and solvent-resistant packing suit all spraying mediums

Precision Airbrush Kit

The POINTZERO PZ-270XS is a dual-action gravity-feed airbrush designed for detailed craft and art applications. Its internal-mix design lets the trigger control air and fluid independently for precise spray management. The set includes three interchangeable nozzle and needle combinations measuring .2, .3 and .5 mm. A balanced, precision-crafted body supports comfortable handling during extended sessions.

Thermals Noise Power

This airbrush operates without internal electronics, so it produces no heat, fan noise or electrical power draw during use. Performance depends entirely on an external air supply capable of delivering 15 to 50 psi working pressure. The solvent-resistant needle packing and fine-finish stainless-steel needle reduce tip-dry and allow safe use with a wide range of spraying mediums. Consistent atomization is maintained across the supplied tip sizes.

Build Integration

The unit connects via a standard 1/8" BSP fitting and includes a quick-disconnect fitting for rapid hose changes. A 2 cc gravity-feed colour cup sits on top, keeping the sight line clear for fine detail work. Interchangeable nozzles enable spray patterns from hairline up to 1.75 inches without needing separate tools beyond the included nozzle wrench. Buyers without a regulated compressor or those needing larger paint capacity will require additional equipment.

Highlights

  • Dual-action trigger gives independent air and fluid control
  • Three tip sizes (.2 .3 .5 mm) cover hairline to 1.75" patterns
  • Gravity-feed 2 cc cup keeps view clear for detail work
  • Needle backstop pre-sets trigger travel for consistent line widths
  • Stainless-steel needle and solvent-resistant packing suit all spraying mediums

Specifications

BrandPointZero
Craft TypeCraft Accessories
ColorSilver

Questions about this item

How do I install the 0.2 mm tip and needle on the PZ-270XS, and what step is often missed?

The 0.2 mm tip and needle come pre-installed; to swap sizes use the supplied nozzle wrench on the head assembly and remember to adjust the rear needle backstop to match the new needle travel.

What maintenance will the stainless-steel needle and solvent-resistant packing need over time?

Flush the 2 cc gravity cup and internal passages after each session; the stainless-steel needle resists tip-dry and the packing tolerates all common mediums, so only routine cleaning is required.

At what air pressure does the PZ-270XS hit its operating ceiling during extended spraying?

The airbrush requires a supply of 15 to 50 psi; sustained work at the upper end of that range is the practical limit before atomization quality drops.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.