We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
PISKEKAT USB 1.0/1.1 extender over Cat5 or Cat6 up to 150ft

PISKEKAT

PISKEKAT USB 1.0/1.1 Extender over Cat5/Cat6 150ft

SKU CH-XC6D-R8A41

Extends USB 1.0/1.1 connections up to 150 feet over Cat5/Cat6 cabling, reaching almost 10 times the standard cable length limit

  • TypeOther
  • Extends USB 1.0/1.1 signals up to 150 feet using Cat5/Cat6 cabling
  • Reaches almost 10 times the standard USB cable length limit
  • Works with existing Ethernet wiring already installed in walls
  • Compatible with USB computers, consoles, cameras, printers, keyboards and mice
  • Backed by a manufacturer lifetime warranty on all cables

USB 1.0/1.1 extension up to 150ft

This extender carries USB 1.0 and 1.1 signals over standard Cat5 or Cat6 cabling to a distance of 150 feet. It provides almost 10 times the reach of a direct USB cable run. The adapter works with any USB-equipped computer, game console, camera, printer, keyboard or mouse.

Suited for legacy low-speed peripherals at distance

It is intended for USB 1.0 and 1.1 devices such as keyboards, mice, printers and basic cameras that need to operate far from the host. Buyers who need to extend USB 2.0 or 3.0 connections should look at a different solution. Installations without existing Cat5 or Cat6 infrastructure will require new cable pulls.

Maximum reach of 150 feet over Cat5 or Cat6

The single specification that decides fit is the 150-foot extension limit using Cat5 or Cat6 cabling. If the required run exceeds this distance the extender will not work. For shorter runs a standard USB cable remains simpler.

Highlights

  • Extends USB 1.0/1.1 signals up to 150 feet using Cat5/Cat6 cabling
  • Reaches almost 10 times the standard USB cable length limit
  • Works with existing Ethernet wiring already installed in walls
  • Compatible with USB computers, consoles, cameras, printers, keyboards and mice
  • Backed by a manufacturer lifetime warranty on all cables

Specifications

TypeOther

Questions about this item

Does the extender draw extra power or generate noticeable heat during continuous all-day use?

The extender is passive and draws no additional power beyond what the USB 1.0/1.1 host provides, so heat remains negligible even over the full 150ft run.

What existing cabling must I already have in place for this extender to work?

You need a pre-installed Cat5 or Cat6 Ethernet cable run between the two locations; the extender modules connect to each end of that cable.

Will my USB 1.0 keyboard and mouse still respond reliably when connected through the 150ft link?

Yes, the extender is fully compatible with USB 1.0 and 1.1 devices such as keyboards, mice, printers and cameras, maintaining standard low-speed and full-speed signalling across the Cat5/Cat6 span.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.