PISKEKAT
PISKEKAT Triple Monitor Mount 27" 19.8 lbs Gas Spring
Holds three screens up to 27 inches, each arm carrying 4.4 to 19.8 lbs on VESA 75 or 100 mounts with full tilt, swivel and 360° rotation
- TypeMounting Racks
- Fits screens from 17 to 27 inches with VESA 75x75mm and 100x100mm
- Each arm holds 4.4 to 19.8 lbs for secure mounting
- Tilt and swivel ±90° plus 360° rotation for flexible viewing
- Gas spring arms enable smooth height adjustment and extension
- C-clamp or grommet mount with integrated cable management frees desk space
Triple Monitor Mount for 27-Inch Displays
This gas-spring mount holds three flat or curved screens up to 27 inches, each weighing 4.4 to 19.8 lbs. It suits home-office workers, traders and gamers who need a single pole to carry three VESA 75x75 or 100x100 monitors. The centre screen height is adjustable while the two side arms use gas springs for smooth extension and retraction. It is not for users with screens larger than 27 inches or heavier than 19.8 lbs per arm.
Installation Steps and Common Issues
Mounting uses a C-clamp or grommet base that fits desk thicknesses or hole diameters from 0.39 to 3.15 inches. Quick-release VESA plates speed screen attachment, and integrated cable channels route wires inside the arms. The most frequent problem is insufficient desk thickness or a hole outside the stated range, which prevents a secure clamp. Over-tightening the gas-spring tension on light monitors can also cause unwanted upward drift.
Pre-Purchase Checks for Your Desk and Screens
Verify each monitor has a 75x75 mm or 100x100 mm VESA pattern and weighs between 4.4 and 19.8 lbs. Confirm your desk surface or grommet hole falls within the 0.39-to-3.15-inch range and can support the combined load of three screens plus the pole. Ensure enough clearance behind the desk for the pole and arm articulation through ±90° tilt, ±90° swivel and 360° rotation. Buyers with ultra-thin desks, non-VESA screens or screens exceeding 27 inches should look elsewhere.
Highlights
- Fits screens from 17 to 27 inches with VESA 75x75mm and 100x100mm
- Each arm holds 4.4 to 19.8 lbs for secure mounting
- Tilt and swivel ±90° plus 360° rotation for flexible viewing
- Gas spring arms enable smooth height adjustment and extension
- C-clamp or grommet mount with integrated cable management frees desk space
Specifications
| Type | Mounting Racks |
|---|
Questions about this item
How do I verify the gas-spring arms are balanced for my 27" screens after installation?
Each arm should hold its position when you tilt ±90°, swivel ±90° or rotate 360° without drifting; if a screen sags or rises on its own, adjust the spring tension until the 4.4–19.8 lb range matches your monitor's weight.
What mounting hardware and tools come in the box versus what I must supply?
The package includes C-clamp and grommet base options, quick-release VESA plates for 75×75 mm and 100×100 mm patterns, integrated cable clips and all required bolts; you only need a desk with 0.39–3.15" thickness or hole diameter and a basic hex key.
Which VESA pattern and weight class should I match when choosing between the listed monitor sizes?
Pick any display from 17" to 27" that uses 75×75 mm or 100×100 mm VESA and weighs 4.4–19.8 lbs per arm; all three arms share the same spec, so no separate version exists.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



