We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

PISKEKAT

PISKEKAT Server Rack Cable Kit 24-Pin 2x8-Pin EPS 3x8-Pin PCIe 30cm 16AWG

SKU CH-4D9B-1VCF6

Sleeved PSU extension kit with 24-pin ATX, dual 8-pin EPS and triple 8-pin PCIe cables, 30 cm length, 16 AWG wire, gold-plated GPU terminals rated for 15000 bends

  • TypeServer
  • Supports dual-CPU motherboards with two 4+4-pin EPS cables
  • Gold-plated GPU terminals rated for over 15000 bends
  • 16AWG UL1015 wire handles higher current without overheating
  • 30cm length with four combs per cable tidies chassis routing
  • Compatible with RM, RMX, HX series PSUs from 550W to 1000W

Dual-CPU Server Cable Kit

This PISKEKAT extension kit supplies one 24-pin ATX cable, two 4+4-pin EPS cables and three 8-to-6+2-pin PCIe cables. Each 30 cm run uses UL1015 16 AWG wire and includes four combs for tidy routing inside server chassis.

Suited for dual-processor builds

Builders assembling dual-CPU motherboards gain the extra EPS connectors those boards demand. The gold-plated PCIe terminals survive over 15000 bends for repeated GPU swaps. The kit lacks a 12VHPWR connector so cards requiring that interface cannot be powered.

16 AWG current capacity

UL1015 16 AWG conductors carry the higher current needed by multi-GPU and dual-CPU configurations without overheating. This wire gauge is the decisive factor when choosing cables for sustained heavy loads in server racks.

Highlights

  • Supports dual-CPU motherboards with two 4+4-pin EPS cables
  • Gold-plated GPU terminals rated for over 15000 bends
  • 16AWG UL1015 wire handles higher current without overheating
  • 30cm length with four combs per cable tidies chassis routing
  • Compatible with RM, RMX, HX series PSUs from 550W to 1000W

Specifications

TypeServer

Questions about this item

How do I route the 30 cm 16AWG extensions with the four combs per cable so they stay tidy?

Thread each 30 cm extension through its four included combs, seat the 24-pin ATX, both 4+4-pin EPS and three 6+2-pin PCIe connectors firmly, then tighten the combs to lock the wires in a straight run.

When will the gold-plated PCIe terminals need replacement under normal use?

The gold-plated PCIe terminals are rated for over 15000 bends, so they typically outlast multiple GPU upgrades before any wear appears.

At what sustained load does the 16AWG UL1015 wire hit its thermal limit first?

The 16AWG UL1015 conductors are chosen for higher copper content to handle the current drawn by RM550x through RM1000x and HX1000 series units without overheating.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.