We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved cable kit with 24-pin ATX, 8-pin EPS, two 8-pin PCIe and combs

PISKEKAT

PISKEKAT Server Rack Cable Kit 18AWG ATX 24P EPS 8P PCI-E 8P 180° Combs

SKU CH-V074-3JHF0

Sleeved 18AWG power extension kit with ATX 24-pin, EPS 8-pin and dual PCI-E 8-pin cables, pre-bent at 180° for tidy routing and supplied with cable combs

  • TypeServer
  • Clean cable routing with included combs for every connector
  • 18AWG conductors deliver reliable power to motherboard and GPU
  • 180° pre-bent layout keeps cables flat and tidy
  • Heat-shrink-free design reduces bulk inside the case
  • 24-pin ATX, 8-pin EPS and two 8-pin PCI-E in one kit

Cable Kit Contents

This kit supplies one 24-pin ATX cable, one 4+4-pin EPS cable and two 8-pin PCIe cables. All conductors use 18AWG wire wrapped in a high-density flexible sleeve. Two cable combs per cable are included for tidy routing inside server racks or workstations.

Capacity and Headroom

The 18AWG conductors handle typical server and workstation power loads without voltage drop. The pre-bent 180-degree design keeps cables flush against components, but very long runs or extreme current draws may exceed the practical length of these extensions.

Interface Practical Limits

As sleeved extensions they rely on the underlying PSU connectors, so compatibility follows the ATX, EPS and PCIe standards already present on the power supply. The heat-shrink-less construction reduces bulk, yet the fixed 180-degree bend limits flexibility in tight spaces where a straighter exit is required.

Highlights

  • Clean cable routing with included combs for every connector
  • 18AWG conductors deliver reliable power to motherboard and GPU
  • 180° pre-bent layout keeps cables flat and tidy
  • Heat-shrink-free design reduces bulk inside the case
  • 24-pin ATX, 8-pin EPS and two 8-pin PCI-E in one kit

Specifications

TypeServer

Questions about this item

Will the 18AWG wires and 180° pre-bent shape fit cleanly behind a motherboard tray in an older ATX tower?

The 18AWG gauge keeps each wire stiff enough to hold the bend, while the 180° pre-bent design layers upper cables longer so they sit flat against the tray without kinking.

How can I confirm the 24-pin ATX and 8-pin PCI-E extensions are seated correctly after routing?

Each connector clicks firmly into its header; the heat-shrink-less ends leave the pins visible so you can verify every pin is fully inserted before powering on.

Does the kit include combs for every cable or do I need extras for the second PCI-E run?

The box supplies two combs for each of the four cables — one 24-pin ATX, one 4+4-pin EPS and two 8-pin PCI-E — so both GPU leads are covered.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.