We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White sleeved PSU cable extension kit with 24-pin, 8-pin EPS and two 8-pin PCIe cables, 30 cm length, includes cable combs

PISKEKAT

PISKEKAT PSU Cable Extension Kit 30cm 16AWG White

SKU CH-CCVJ-19S9R

A 30 cm white PSU cable extension kit with 16 AWG tinned copper wires, cable combs and 24-pin, 8-pin EPS plus two 8-pin PCIe connectors

  • TypeServer
  • Complete kit with 24-pin ATX, EPS and dual PCI-e cables
  • 30 cm length per cable for tidy routing
  • 16 AWG pure copper tinned wire for stable current
  • Triple-layer woven silicone jacket bends easily
  • Acrylic cable combs included for neat alignment

Extension Kit Contents

This PISKEKAT kit supplies a 24-pin ATX motherboard cable, an 8-pin EPS cable split as 4+4, and two 8-pin PCIe cables split as 6+2. Each cable measures 30cm and uses 16AWG pure copper tinned conductors for stable current delivery. The white sleeved set is designed for ATX power supplies and includes acrylic cable combs for a tidy appearance. Builders who need longer runs or additional connectors will find this kit insufficient.

Thermals and Handling

The triple-layer woven sleeving is wrapped in super-soft silicone that remains pliable during routing and resists stiffening under load. Supplier testing indicates the material avoids the high-temperature odour sometimes produced by lesser extensions. No active cooling or fan interaction is involved, so the kit adds no acoustic signature to the system. Installers who require fire-rated or plenum-grade insulation should verify suitability separately.

Build Integration

The 30cm length suits typical mid-tower layouts and leaves enough slack for behind-the-tray routing without excessive coils. Included acrylic combs align individual wires for a clean visual finish and can be repositioned as needed. Compatibility is stated for all ATX power supplies, so no proprietary pin-outs are required. Systems with non-standard PSU connector spacing or extremely compact chassis may need custom-length alternatives.

Highlights

  • Complete kit with 24-pin ATX, EPS and dual PCI-e cables
  • 30 cm length per cable for tidy routing
  • 16 AWG pure copper tinned wire for stable current
  • Triple-layer woven silicone jacket bends easily
  • Acrylic cable combs included for neat alignment

Specifications

TypeServer

Questions about this item

How do I fit the 30cm extensions and the acrylic combs without stressing the 24-pin ATX connector?

Plug each extension into the matching PSU lead, slide the combs onto the wires, then route the soft silicone sleeving with gentle curves so the 16AWG copper cores do not kink at the connector.

What upkeep will the white sleeving and combs need over time?

Dust the acrylic combs and wipe the Triple Layer Weaving sleeve with a dry cloth; the 16AWG tinned copper conductors require no further service.

At what point does the 30cm length limit routing in a full-tower build?

The fixed 30cm reach may fall short when the PSU mounts far from the motherboard or GPU, so measure your case clearance before ordering.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.