We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black and white braided PSU extension cables with combs, 30 cm long

PISKEKAT

PISKEKAT PSU Cable Extension Kit 30cm 16AWG 24Pin 2x8Pin 3x8Pin Black/White

SKU CH-JZ1R-1CWET

A 30 cm PSU cable extension kit with 16 AWG tinned-copper wires, triple-layer woven sleeving, black and clear cable combs, and 24-pin, dual 8-pin EPS, and triple 8-pin PCIe connectors

  • TypeServer
  • Complete cable set covers ATX, EPS and PCI-e power needs
  • 16AWG pure copper tinned wire delivers stable current flow
  • 30cm length fits standard chassis cable routing paths
  • Triple-layer woven silicone jacket bends easily without spring-back
  • Black and clear cable combs included for custom colour matching

PSU Cable Extension Kit 30cm

This kit provides 1x24-pin ATX motherboard power cable, 2x8Pin EPS power cables, and 3x8Pin PCI-e GPU power cables in a single package. Each extension measures 30cm and uses 16AWG pure copper tinned wire for stable current delivery. Black and clear cable combs are included for customisable routing. It suits builders extending ATX power connections inside server racks or custom chassis.

Replaces short stock cables

Factory PSU cables often fall short in larger server cabinets or when routing behind motherboard trays. These 30cm extensions bridge the gap without adding bulk, and the triple-layer woven silicone sheath bends cleanly into tight channels. The jump is worth it when stock leads cannot reach the 24-pin, EPS or PCI-e sockets without tension or sharp kinks.

Sustained-load behaviour

The 16AWG conductors and tinned copper resist heat build-up during continuous operation, and the silicone wrap suppresses the odour that cheaper sleeving emits at high temperature. Cables hold their routed shape over time thanks to the soft yet memory-retentive jacket. Not for builders who need longer runs than 30cm or who require additional 8-pin connectors beyond the five supplied.

Highlights

  • Complete cable set covers ATX, EPS and PCI-e power needs
  • 16AWG pure copper tinned wire delivers stable current flow
  • 30cm length fits standard chassis cable routing paths
  • Triple-layer woven silicone jacket bends easily without spring-back
  • Black and clear cable combs included for custom colour matching

Specifications

TypeServer

Questions about this item

What clearance does the 30cm 16AWG extension kit need behind the motherboard tray?

Each cable is 30cm long and uses a flexible triple-layer weave with soft silicone, so it routes easily in standard ATX cases without requiring extra depth behind the tray.

Which connector goes on the PSU side versus the component side during installation?

Plug the female ends into your existing PSU cables first, then route the male 24-pin, 8-pin EPS and 8-pin PCIe ends to the motherboard and graphics cards — reversing them leaves the keyed pins misaligned.

When should the black or clear cable combs be replaced?

The combs are reusable plastic; replace them only if a tooth snaps or the comb warps from heat, otherwise they last for the life of the 16AWG tinned-copper extensions.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.