PISKEKAT
PISKEKAT Extra Tall 39 Inch Monitor Stand Server Rack
A 39-inch height-adjustable monitor arm supports 13 to 32-inch screens up to 35-inch ultrawides and 22lbs with 180° tilt, 180° swivel, 360° rotation, VESA 75x75mm and 100x100mm.
- TypeMounting Racks
- Extra-tall 39" pole lets you work standing or sitting
- Fits 13-32" screens and ultra-wide up to 35" at 22lbs
- VESA 75x75mm and 100x100mm plates cover most monitors
- 180° tilt, 180° swivel, 360° rotation for ergonomic angles
- C-clamp to 3.93" and grommet to 2.75" desks included
Extra Tall 39 Inch Monitor Stand
This extra tall monitor stand provides a 39 inch height adjustable center pole for sit and stand workstations. It supports screens from 13 to 32 inches and ultra wide displays up to 35 inches with a maximum load of 22lbs. VESA mounting plates for 75x75mm and 100x100mm patterns are included.
Replaces Fixed Height Monitor Bases
The articulating arm delivers 180° tilt, 180° swivel and 360° rotation so you can position the screen at an ergonomic viewing angle. Integrated cable management keeps power and data cords organized along the pole. Installation is designed to take about 10 minutes using the supplied tools.
Check Desk Thickness And Mounting Space
Verify your desk thickness before ordering because the C clamp fits up to 3.93 inches and the grommet base fits up to 2.75 inches. Ensure there is enough clearance behind the desk for the chosen mounting method. This stand is not for users who need dual monitor support or a wall mounting solution.
Highlights
- Extra-tall 39" pole lets you work standing or sitting
- Fits 13-32" screens and ultra-wide up to 35" at 22lbs
- VESA 75x75mm and 100x100mm plates cover most monitors
- 180° tilt, 180° swivel, 360° rotation for ergonomic angles
- C-clamp to 3.93" and grommet to 2.75" desks included
Specifications
| Type | Mounting Racks |
|---|
Questions about this item
What desk thickness can the C-Clamp and grommet base accommodate on this 39 inch stand?
The C-Clamp fits desks up to 3.93 inches thick and the grommet base fits desks up to 2.75 inches thick.
Which VESA patterns does the detachable mounting plate support for a 13-32 inch screen?
The plate supports 75x75mm and 100x100mm VESA holes; attach the plate to the monitor first, then slide it onto the arm until it clicks.
How often should I re-tighten the arm joints on a 22lb ultra-wide monitor?
Check the tilt, swivel and rotation bolts every few months and tighten if the screen drifts; the included hex key fits all joint screws.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



