We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Open-frame 6U wall-mount rack, black powder-coated steel, 18in deep with swing gate

PISKEKAT

PISKEKAT 6U Wall Mount Server Rack 18in Depth 16in Mounting Holes Swing Gate Square Tapped Holes

SKU CH-NAHY-9CJNX

Wall-mount open-frame rack holds 19-inch gear with 16-inch mounting centres, 18-inch depth, and a 180-degree swing gate for rear access

  • TypeMounting Racks
  • 6U height fits 19-inch gear in tight spaces
  • 18-inch depth and 16-inch mounting holes match standard studs
  • Cold-rolled steel with powder coat resists rust and holds 110 lbs static
  • 180-degree swing gate opens both sides for rear cable access
  • EIA-310 compliant square or tapped rails let you choose mounting style

6U Wall Mount Rack with 16in Mounting Holes

This 6U open-frame wall mount rack accepts standard 19in equipment and offers an 18in depth with 16in spaced mounting holes. Square and tapped hole patterns are interchangeable on the same rails. Cold rolled steel with electrostatic powder coat resists rust and corrosion. It suits network, AV, data and media gear in server rooms, offices or home labs.

Replacing a Fixed Shelf or Enclosed Cabinet

The 180 degree swing gate gives rear cable access from both sides, removing the need to pull the whole chassis away from the wall. Open frame construction improves airflow compared with enclosed cabinets. Static load capacity is 110 lbs and sliding load is 55 lbs. The jump is worth it when rear access is difficult or heat buildup is a concern in tight spaces.

Verify Wall Structure and Equipment Depth

Confirm the mounting surface can support the loaded weight and that 16in hole spacing matches your studs or anchors. Ensure your deepest device fits within the 18in usable depth. The rack complies with EIA/ECA-310-E for 19in gear. Installation hardware, a drilling template and video guide are included.

Highlights

  • 6U height fits 19-inch gear in tight spaces
  • 18-inch depth and 16-inch mounting holes match standard studs
  • Cold-rolled steel with powder coat resists rust and holds 110 lbs static
  • 180-degree swing gate opens both sides for rear cable access
  • EIA-310 compliant square or tapped rails let you choose mounting style

Specifications

TypeMounting Racks

Questions about this item

What wall spacing and depth does the 6U rack require for mounting?

The rack mounts on 16inch centre holes and projects 18inch from the wall, so the wall must accept that hole pattern and clearance depth.

How is the swing gate secured during installation, and what step is often missed?

The gate swings 180 degrees for rear access; the step often missed is tightening the hinge bolts fully after aligning the gate so it does not sag under load.

Which mounting hardware fits the square and tapped holes, and when should it be replaced?

Standard 19inch EIA-310 cage nuts or screws fit both square and threaded holes; replace any stripped cage nuts or damaged threads when equipment is swapped.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.