We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 25U four-post open server rack on casters with vented top shelf, square and round mounting rails

PISKEKAT

PISKEKAT 25U 4-Post Server Rack with PDU & Shelves

SKU CH-8HR4-B1QF5

A 25U four-post rack with round and square mounting holes, reinforced vented top and bottom plates, an eight-outlet PDU, two 1U shelves, casters and leveling feet.

  • TypeMounting Racks
  • Mount sound gear securely with round-hole beams using 10-32 screws
  • Install 19-inch network devices on square-hole beams with M5 and M6 screws
  • Place laptops or consoles on the reinforced vented top plate
  • Ready to use with included 8-outlet PDU, two 1U shelves, casters and leveling feet
  • Supports 500 lbs on feet and 400 lbs on casters with SPCC steel frame

25U Rack for Network & Audio Gear

This 25U four-post rack fits standard 19-inch network equipment on square-hole rails and audio components on round-hole rails with 10-32 screws. The frame uses SPCC cold-rolled steel with a black RAL9005 powder coat finish. It ships with an 8-outlet PDU, two 1U shelves, leveling feet and locking casters.

Replaces Smaller Wall-Mount Cabinets

Builders who have outgrown 6U to 22U wall brackets gain 25U of continuous vertical space without drilling into studs. The jump is worth it when equipment depth exceeds typical cabinet limits or when mixed screw patterns demand both round and square mounting holes in one frame.

Sustained Load on Feet or Casters

With leveling feet the rack carries up to 500 lbs (220 kg) of mounted hardware; on casters the rating drops to 400 lbs (180 kg). Reinforced vented top and bottom plates maintain airflow while supporting a laptop, projector or console during long sessions.

Highlights

  • Mount sound gear securely with round-hole beams using 10-32 screws
  • Install 19-inch network devices on square-hole beams with M5 and M6 screws
  • Place laptops or consoles on the reinforced vented top plate
  • Ready to use with included 8-outlet PDU, two 1U shelves, casters and leveling feet
  • Supports 500 lbs on feet and 400 lbs on casters with SPCC steel frame

Specifications

TypeMounting Racks

Questions about this item

What floor space does the 25U rack occupy with casters fitted?

The unit measures 19.7 in wide, 21.7 in deep and 50.5 in high with casters installed.

How are the 19-inch rails attached to the four posts?

Each post has square-hole beams on one side and round-hole beams on the other; use M5 or M6 cage nuts in the square holes for network gear and 10-32 screws in the round holes for audio equipment.

When should the leveling feet replace the casters?

Switch to the included leveling feet when the loaded weight exceeds 400 lbs; the feet raise the static capacity to 500 lbs.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.