We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal 1U vented rack shelf 19 inch 6 inch deep no lip with stiffener and mounting hardware

PISKEKAT

PISKEKAT 1U Vented Rack Shelf 19 Inch 6 Inch Deep No Lip

SKU CH-FHSQ-XQT3T

A vented 1U shelf mounts in any 19-inch rack, holds up to 22 pounds on 1.2 mm sides, and ships disassembled with M6 and M5 hardware

  • TypeServer
  • 1U low profile fits tight rack spaces
  • No front lip maximises usable shelf depth
  • 2 mm steel sides support 22 lb load
  • Vented tray improves airflow for hot gear
  • Includes M6 cage nuts and M5 fixings

Universal 19-inch rack compatibility

This 1U vented shelf fits every standard 19-inch rack or cabinet, accepting IT, network and other equipment without brand restrictions. The stiffener and 1.2 mm thick side rails give a 22-pound load rating that exceeds typical cantilever trays.

Disassembled kit with included hardware

The shelf ships in pieces to protect mounting ears during transit and assembles on-site using the supplied four M6 screws with cage nuts and four M5 screws with nuts. No specialised tools are required beyond a common screwdriver or hex key.

152 mm depth for shallow devices

At 6 inches deep the tray comfortably holds patch panels, small switches, modems and similar shallow gear. It cannot accommodate deeper servers, full-length UPS units or other equipment that exceeds the 152 mm platform.

Highlights

  • 1U low profile fits tight rack spaces
  • No front lip maximises usable shelf depth
  • 2 mm steel sides support 22 lb load
  • Vented tray improves airflow for hot gear
  • Includes M6 cage nuts and M5 fixings

Specifications

TypeServer

Questions about this item

How can I verify the shelf is holding the rated 22 pounds without bending after installation?

The 1.2 mm thick holding sides and integrated stiffener keep the tray rigid; if the shelf stays level under load and the mounting ears show no flex, it is performing to its rated capacity.

What hardware comes in the box and what must I supply for a standard 19 inch rack?

Included are 4 M6 screws with cage nuts and 4 M5 screws with nuts; you only need to provide a Phillips screwdriver and ensure the rack posts have square or threaded holes.

Which depth version should I choose for a shallow 1U switch that needs front clearance?

The 6 inch (152 mm) deep, no-lip design is the only version offered; it maximises front clearance while still supporting the 22 pound load rating.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.