We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black vented 1U cantilever shelves with mounting hardware

PISKEKAT

PISKEKAT 1U Cantilever Rack Shelf 14in Deep 2Pack

SKU CH-R2H2-M6N1Q

Two 1U cantilever shelves mount in standard 19in racks, each holding 55lbs on a vented 17.5in by 10in surface

  • TypeMounting Racks
  • Holds routers and UPS units in standard 19in racks
  • Vented surface improves airflow to prevent equipment overheating
  • 55lb capacity from 1.5mm cold-rolled steel with powder coat
  • 5in by 10in usable area fits diverse network gear
  • Two shelves plus M6 screws, washers and cage nuts included

Product Identity

This two-pack of 1U cantilever shelves mounts in standard 19-inch racks and cabinets. Each unit provides a 17.5-inch wide by 10-inch deep usable surface rated for 55 lbs of equipment. The vented steel construction suits network gear such as routers, modems, UPS units and monitors in AV or IT environments.

Compatibility Check

Verify the rack or cabinet follows EIA/ECA-310 spacing and offers at least 1U of vertical clearance. Confirm the front mounting flanges accept M6 cage nuts and screws, which are included in the hardware kit. Ensure the 10-inch depth from the front rails leaves adequate rear cable management space for the intended devices.

Build Integration

The shelves bolt directly to the front rails using the supplied M6 fasteners and plastic washers, requiring no rear support posts. Cold-rolled 1.5 mm steel with black powder coating handles the rated load while the vented deck promotes passive airflow around installed hardware. Two units ship together, letting you populate separate rack locations or stack them for denser deployments.

Highlights

  • Holds routers and UPS units in standard 19in racks
  • Vented surface improves airflow to prevent equipment overheating
  • 55lb capacity from 1.5mm cold-rolled steel with powder coat
  • 5in by 10in usable area fits diverse network gear
  • Two shelves plus M6 screws, washers and cage nuts included

Specifications

TypeMounting Racks

Questions about this item

Does the package include mounting hardware or do I need to buy screws and cage nuts separately?

Each 2-pack includes two shelves plus twelve M6 screws, twelve M6 plastic washers and twelve M6 cage nuts, so no extra mounting hardware is required.

The listing mentions a 14-inch depth — does that refer to the overall shelf or the usable surface?

The overall shelf depth is 10 inches; the 14-inch figure describes the cantilever design that fits 14-inch deep rack posts, while the usable surface measures 17.5 inches wide by 10 inches deep.

Will a 55 lb UPS sit safely on the vented steel shelf without bending?

Yes, the 1.5 mm cold-rolled steel shelf with powder-coated finish is rated for 55 lbs, and the vented design maintains airflow while supporting that weight.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.