We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black vented cantilever rack shelves with mounting hardware

PISKEKAT

PISKEKAT 1U Cantilever Rack Shelf 10in Deep 19in 55lbs 2Pack

SKU CH-MJRF-EP29Y

Two vented cantilever shelves mount in 1U of 19in rack space, each supporting 55lbs on a 17.5 by 10in surface

  • TypeMounting Racks
  • Vented surface improves airflow to prevent equipment overheating
  • 55 lbs capacity on 1.5 mm cold-rolled steel holds heavy devices
  • Two shelves included with full mounting hardware kit
  • 1 U height fits standard 19 in EIA-310 racks
  • 10 in deep cantilever design maximises usable shelf space

Two-pack cantilever shelf for 19in racks

This pack supplies two 1U cantilever shelves that mount directly to standard 19in EIA/ECA-310 posts. Each unit provides a 17.5in by 10in usable surface for routers, modems, UPS units or monitors. The shelves are built from 1.5mm cold-rolled steel with a black electro-static powder coat and arrive with M6 screws, washers and cage nuts for immediate installation.

Vented steel construction aids passive cooling

Perforations across the 10in deep deck allow air to circulate around mounted devices, reducing the risk of overheating without adding active fans. The 1.5mm steel panel dissipates heat while supporting up to 55lbs of equipment. No power draw or noise is introduced, making the shelf suitable for quiet office or studio environments.

Fixed depth suits shallow hardware only

The 10in projection limits the shelf to equipment that fits within that envelope; deeper servers or battery modules will overhang and cannot be secured. Under continuous load the powder-coated steel resists sagging, but the cantilever design means the full 55lb rating applies only when the rear mounting points are fully engaged on both posts. Builders needing adjustable depth or higher capacity should look elsewhere.

Highlights

  • Vented surface improves airflow to prevent equipment overheating
  • 55 lbs capacity on 1.5 mm cold-rolled steel holds heavy devices
  • Two shelves included with full mounting hardware kit
  • 1 U height fits standard 19 in EIA-310 racks
  • 10 in deep cantilever design maximises usable shelf space

Specifications

TypeMounting Racks

Questions about this item

How do I install the PISKEKAT 1U cantilever shelf in a 19-inch rack, and which step is often missed?

Mount the two shelves using the included M6 cage nuts, screws, and plastic washers; the step people skip is fitting the washers between the screw head and the shelf to prevent metal-on-metal contact.

What maintenance or replacement will the PISKEKAT 1U cantilever shelf need over time?

The 1.5 mm cold-rolled steel with black electro-static powder coat requires no scheduled maintenance; only replace the shelf if the 55 lbs capacity is exceeded or the finish is damaged.

What limit appears first when the PISKEKAT 1U cantilever shelf runs under sustained load?

The 55 lbs weight capacity is the first limit; exceeding it risks bending the 10-inch deep cantilever or stripping the M6 cage nuts.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.