We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black open-frame 18U server rack on brake casters with two vented shelves and an 8-outlet PDU

PISKEKAT

PISKEKAT 18U Open Frame Server Rack with Brake Casters, 8-Outlet PDU, 2 Shelves Black

SKU CH-4PQ8-2DNV3

An 18U open frame rack holds 19-inch servers and network gear, includes two vented shelves and an eight-outlet PDU, and rolls on brake casters

  • TypeServer
  • Ready-to-use bundle with rack, shelves and 8-outlet PDU included
  • 18U capacity fits standard 19-inch equipment in compact footprint
  • Four-post SPCC steel frame supports 1300 lb on leveling feet
  • Locking brake casters allow secure mobility and 700 lb rolling load
  • Vented cantilever shelves promote airflow for servers, NAS and AV gear

18U open-frame rack kit

The PISKEKAT 18U open-frame server rack arrives as a complete kit with two vented cantilever shelves and an eight-outlet surge-protected PDU. It is built for 19-inch standard equipment such as servers, NAS units, routers and AV gear. The four-post frame uses SPCC cold-rolled steel with a black RAL9005 powder coat. Assembly hardware, leveling feet and brake casters are included.

Static load 1300 lbs mobile 700 lbs

With leveling feet installed the rack supports up to 1300 lbs of mounted equipment, while the brake casters reduce the safe limit to 700 lbs. The vented shelves promote passive airflow around devices without adding active cooling noise. The PDU distributes power through eight outlets with surge protection. The powder coat finish resists scratches and rust in typical indoor environments.

Floor anchoring option for permanent installs

The base is pre-drilled for bolting the rack to the floor when a fixed installation is required. Brake casters lock the unit in place during normal mobile use. The frame depth of 550 mm accommodates standard-depth servers and network appliances. Buyers needing enclosed side panels or a higher static load rating should consider alternative cabinet styles.

Highlights

  • Ready-to-use bundle with rack, shelves and 8-outlet PDU included
  • 18U capacity fits standard 19-inch equipment in compact footprint
  • Four-post SPCC steel frame supports 1300 lb on leveling feet
  • Locking brake casters allow secure mobility and 700 lb rolling load
  • Vented cantilever shelves promote airflow for servers, NAS and AV gear

Specifications

TypeServer

Questions about this item

How do I install the 18U open frame rack and what step is often missed?

Assemble the 4-post frame using the supplied screws and nuts, then choose either the brake casters or the leveling feet. The step people skip is bolting the pre-drilled base to the floor when a permanent, immobile installation is required.

What maintenance or replacement will the 8-outlet PDU and vented shelves need later?

The PDU surge protector has a finite joule rating; replace it after a major surge event or when the protection indicator shows it is exhausted. The vented shelves only need occasional dust removal to keep airflow clear.

What limit appears first when the rack runs fully loaded for long periods?

The 700 lb (320 kg) rolling capacity on the brake casters is the first limit; exceeding it risks caster deformation or instability before the 1300 lb (600 kg) static frame rating is reached.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.