We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red sleeved PSU cable kit with 24-pin ATX, 8-pin EPS and two 8-pin PCIe connectors, pre-bent 180° with cable combs

PISKEKAT

PISKEKAT 18AWG Server Rack Cable Kit 24P ATX EPS 8P PCI-E 8P Red

SKU CH-E240-52FT1

Red sleeved 18AWG cable kit with 24-pin ATX, 4+4-pin EPS and two 8-pin PCIe connectors, pre-bent for a tidy 180-degree turn and supplied with combs

  • TypeServer
  • 18AWG wires deliver stable power to motherboard and GPU
  • 24-pin ATX plus 4+4-pin EPS and two 8-pin PCI-E cover full build
  • Pre-bent 180° design keeps cables neat after sharp bends
  • Heat-shrink-less construction removes bulk for cleaner routing
  • Two combs per cable lock wires in place for tidy management

Cable Kit Contents

This kit provides one 24-pin ATX cable, one 4+4-pin EPS cable and two 8-pin PCI-E cables, all built with 18AWG conductors for server rack builds. It targets system integrators who need tidy, pre-sleeved extensions between the PSU and motherboard or GPU.

Sustained Load Behaviour

Thick 18AWG wires handle continuous current without excessive voltage drop, while the high-density sleeve resists abrasion and heat during long uptime. The pre-bent stagger keeps cables seated after a 180-degree bend, so airflow stays unobstructed under constant load.

Pre-Install Checks

Verify that your power supply uses standard ATX, EPS and PCI-E pin-outs, as the extensions are universal only on the component side. Ensure the rack chassis has enough routing depth for the stiff sleeved cables and the included combs.

Highlights

  • 18AWG wires deliver stable power to motherboard and GPU
  • 24-pin ATX plus 4+4-pin EPS and two 8-pin PCI-E cover full build
  • Pre-bent 180° design keeps cables neat after sharp bends
  • Heat-shrink-less construction removes bulk for cleaner routing
  • Two combs per cable lock wires in place for tidy management

Specifications

TypeServer

Questions about this item

How much heat do the 18AWG sleeved cables add when the system runs all day?

The 18AWG wires and high-density sleeve are designed for normal PSU loads; they do not generate noticeable extra heat during continuous operation.

What power-supply connectors must I already have for the 24-pin ATX, 4+4-pin EPS and 8-pin PCIe extensions to work?

Your PSU needs a standard 24-pin ATX, an 8-pin (4+4) EPS and two 8-pin PCIe outputs; the extensions plug directly into those.

Will the pre-bent 180-degree cable layout clear older motherboards with tight CPU-socket clearance?

The upper-layer cables are slightly longer so they stay neat when bent 180°, helping them route cleanly around taller heatsinks on older boards.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.