We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular electronic ballast in grey metal casing with side terminals

Philips

Philips Advance ICN-4P32-N T8 Ballast 120-277V 3-4 Lamps

SKU CH-7X2G-C6N49

Electronic T8 ballast runs three or four lamps at 17, 25, 28, 32 or 40 watts on 120 to 277 volt input

  • typeBallasts
  • Instant start at 0 °F for reliable cold-weather lighting
  • Operates on 120 to 277 V AC for flexible installation
  • Supports 3 or 4 T8 lamps to match fixture needs
  • Handles 17 to 40 W lamps for broad compatibility
  • Electronic ballast design reduces energy use and noise

Ballast for T8 Fluorescent Lamps

This Philips Advance Centium electronic ballast operates three or four T8 lamps at 120 to 277 volts AC. It supports lamp wattages of 17, 25, 28, 32 and 40 watts with instant start. The unit is designed for indoor fluorescent fixtures in commercial or residential settings.

Replaces Magnetic or Failed Electronic Ballasts

Upgrade when an existing ballast hums, flickers or fails to start lamps reliably. The instant-start design eliminates the delay and strobe effect of older magnetic types. It is not suitable for dimming circuits or fixtures requiring programmed rapid start.

Straightforward Wiring for Qualified Installers

Installation follows standard colour-coded leads for line voltage and lamp connections. Ensure power is off and the fixture is grounded before wiring. Common issues include reversed leads, loose tombstone contacts or using lamps outside the supported wattage range.

Highlights

  • Instant start at 0 °F for reliable cold-weather lighting
  • Operates on 120 to 277 V AC for flexible installation
  • Supports 3 or 4 T8 lamps to match fixture needs
  • Handles 17 to 40 W lamps for broad compatibility
  • Electronic ballast design reduces energy use and noise

Specifications

BrandADVANCE
typeBallasts

Questions about this item

What input voltage range does the ICN-4P32-N ballast accept for wiring?

It operates on 120 to 277V AC, so it connects to standard North American branch circuits without a transformer.

Which wiring step is most often missed when installing this instant-start T8 ballast?

Installers frequently forget to disconnect the shunted lamp holders required for instant-start operation.

What lamp wattages should I plan for when the T8 tubes eventually need replacement?

The ballast supports 17, 25, 28, 32 and 40W T8 lamps, so any of those wattages can be used as direct replacements.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.