We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular white electronic ballast with terminal connections

Philips

Philips ADVANCE ICN-2S54-T 117-120W 2-Lamp Electronic Ballast

SKU CH-7PFM-MQ06R

Electronic ballast runs one or two T5HO lamps up to 54 W each on 120 to 277 V input

  • typeBallasts
  • Rapid start delivers quick, flicker-free lighting
  • Operates one or two T5HO lamps up to 54 W each
  • Universal 120 to 277 V input suits varied installations
  • Cold-start rated to -20 °F for reliable operation in low temperatures
  • Centium electronic design provides efficient, quiet performance

Philips ADVANCE ICN-2S54-T Ballast

This electronic fluorescent ballast operates one or two T5HO lamps up to 54 watts each. It accepts a wide input range of 120 to 277 volts AC for commercial lighting installations. The rapid-start design suits offices, retail spaces and institutional fixtures requiring reliable ignition.

Thermals Noise and Power Draw

The unit delivers a total output of 117 to 120 watts across the connected lamps. Electronic circuitry runs cooler and quieter than magnetic alternatives with no audible hum during normal operation. Rapid start reduces electrode stress for consistent performance at the rated minimum starting temperature of -20 degrees F.

Bundled Accessories and Software

No lamps, wiring harnesses or mounting hardware are included with the ballast itself. The bare unit requires separate procurement of compatible T5HO tubes and appropriate fixture components. Installation must follow local electrical codes for the 120 to 277 volt supply connection.

Highlights

  • Rapid start delivers quick, flicker-free lighting
  • Operates one or two T5HO lamps up to 54 W each
  • Universal 120 to 277 V input suits varied installations
  • Cold-start rated to -20 °F for reliable operation in low temperatures
  • Centium electronic design provides efficient, quiet performance

Specifications

BrandADVANCE
typeBallasts

Questions about this item

How do I wire the Philips ADVANCE ICN-2S54-T ballast for two T5HO lamps on a 277 V supply?

Connect the black and white leads to the 120–277 V AC line, then attach the red and blue output leads to the lamp holders following the diagram on the case; the common mistake is swapping the red and blue pairs, which prevents both lamps from striking.

Which component of the ICN-2S54-T is most likely to need replacement after several years of operation?

The internal electrolytic capacitors that filter the high-frequency inverter are the typical wear item; they degrade with heat and on/off cycles, eventually causing flicker or no-start conditions.

At what point does the ballast’s thermal protection activate during continuous high-output use?

The built-in thermal circuit trips when the case temperature exceeds its design limit, shutting down the inverter until the unit cools; sustained operation at the 117–120 W maximum with restricted airflow reaches this limit first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.