Phanteks
Phanteks Glacier EZ-Fit Tool Set 16x12mm Hard Tube Bending Tools 45/90/180° with Fill Bottle
Tool set for bending 16 mm OD, 12 mm ID hard tubing with 45°, 90° and 180° guides, plus cutter, 250 ml fill bottle, 24-pin jumper and 240 grit sandpaper
- TypeTool Set
- SpecificationMaterials Tube Cutter: Plastic + Steel Bending Insert: Rubbe
- Package ContentsTube Cutter 1x Silicone Bending Insert 1x Bending Guides (se
- Accurate bends with 45°, 90° and 180° jigs
- Kink-free tubing using the silicone insert
- Clean cuts from the professional tube cutter
- Mess-free filling with the 250 ml squeeze bottle
- Ready-to-use kit includes cutter, guides, insert, bottle, jumper, sandpaper and manual
Phanteks Glacier EZ-Fit Tool Set
This Phanteks tool set equips custom-loop builders with everything needed to cut, bend and fill 16 mm outer-diameter hard tubing that has a 12 mm inner diameter. The kit bundles a tube cutter, a silicone bending insert, three bending guides, a squeeze bottle, a 24-pin jumper and sandpaper in one package.
Thermals noise and power draw
As a hand-tool kit the set has no thermal output, no fan noise and no power draw of its own. The included 24-pin jumper lets you run the pump independently while leak-testing, so the rest of the system stays off and silent during fill and bleed procedures.
Upgrades and when the jump is worth it
The 45, 90 and 180 degree guides replace improvised mandrels and eliminate the trial-and-error that ruins expensive tubing. The precision cutter and 240 grit sandpaper deliver repeatable bevelled ends that seat cleanly in compression fittings. Builders who want consistent bends without kinks will find the kit pays for itself on the first loop.
Highlights
- Accurate bends with 45°, 90° and 180° jigs
- Kink-free tubing using the silicone insert
- Clean cuts from the professional tube cutter
- Mess-free filling with the 250 ml squeeze bottle
- Ready-to-use kit includes cutter, guides, insert, bottle, jumper, sandpaper and manual
Specifications
| Brand | Phanteks |
|---|---|
| Type | Tool Set |
| Specification | Materials Tube Cutter: Plastic + Steel Bending Insert: Rubber Bending Guides: PP Squeeze Bottle: PE 24-Pin Jumper: PP Sandpaper: Paper Tube Cutter Compatibility 16 mm Hard Tube Bending Insert Compatibility For ID:12mm / OD:16mm Hard Tube Bending Guides Compatibility 16 mm Hard Tube Squeeze Bottle Capacity: 250 ml Sandpaper Grit: 240 |
| Package Contents | Tube Cutter 1x Silicone Bending Insert 1x Bending Guides (set) 1x Squeeze Bottle 1x 24-Pin Jumper 1x Sandpaper 1x Manual 1x |
| Shipping weight | 0.48 kg |
| Package size | 210 × 140 × 102 mm |
Questions about this item
How do I use the 45/90/180° bending guides and silicone insert together for 16x12mm tube without kinks?
Heat the tube evenly, slide the silicone rod fully inside, then press the tube into the matching guide radius while the material is soft; the insert supports the inner wall so the bend stays round.
Which parts of this set wear out and need replacing after repeated builds?
The tube cutter blade dulls over time, the 240-grit sandpaper is single-use per project, and the silicone insert can stretch or tear if bent cold — keep spares for those three items.
What is the first limitation I hit when bending many 16x12mm tubes in one session with these tools?
The 250 ml squeeze bottle empties quickly when flushing or filling multiple loops, so you will refill it long before the guides or cutter show any fatigue.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115599BTC
In stock
