PerfectVision Manufacturing
PerfectVision Manufacturing CR01BSR0-05 RG6 Coaxial RF Cable Black 1000ft
Black RG-6 coaxial cable with solid copper conductor, UL Listed and DirecTV approved, supplied on a 1000ft pull-box reel for in-wall runs
- TypeCoax Cables
- ColorBlack
- Length1000
- FeaturesUniversal
- Reliable signal up to 3 GHz bandwidth
- Solid bare copper 18 AWG conductor for low loss
- CL2-rated PVC jacket safe for in-wall runs
- UL listed and DirecTV/Dish/Exede approved
- 1000 ft pull-box with internal reel for easy handling
Solid copper RG-6 for installers
This black RG-6 coaxial cable uses an 18 AWG solid bare copper conductor and is rated to 3 GHz. It carries UL listing, CL2 rating for in-wall runs, and approvals from DirecTV, Dish and Exede. The PVC jacket and foamed polyethylene dielectric suit HD and general RF distribution.
1000-foot pull box with internal reel
Supplied on a 1000-foot EnviroReel in a pull box, the cable pays out smoothly during long pulls. Foot markings on the jacket let you measure and cut exact lengths without a separate tape. The reel design reduces kinking and tangling on multi-drop jobs.
Check connector and tool compatibility
Verify that your F-type compression or crimp connectors accept 18 AWG solid copper centre conductors and the stated jacket diameter. Ensure your compression tool matches the connector series you plan to use. Confirm local code accepts CL2-rated cable for the intended in-wall path.
Highlights
- Reliable signal up to 3 GHz bandwidth
- Solid bare copper 18 AWG conductor for low loss
- CL2-rated PVC jacket safe for in-wall runs
- UL listed and DirecTV/Dish/Exede approved
- 1000 ft pull-box with internal reel for easy handling
Specifications
| Brand | Perfect Vision |
|---|---|
| Model | CR01BSR0-05 |
| Type | Coax Cables |
| Color | Black |
| Length | 1000 |
| Features | Universal |
Questions about this item
Does the solid copper conductor generate noticeable heat when the cable runs continuously at 3 GHz?
The solid bare copper conductor is passive and does not generate heat; signal loss at 3 GHz is minimal for RG-6 of this length.
What connectors and tools do I already need to terminate this 1000 ft reel?
You need F-type compression connectors, a coax stripper and a compression crimp tool; the cable has no pre-fitted ends.
Will the CL2-rated PVC jacket and foamed polyethylene dielectric work with my older satellite receivers and splitters?
Yes, the cable is DIRECTV, Dish and Exede approved and SBCA compliant, so it interoperates with legacy satellite hardware.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



