Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
PCCOOLER
A 30 mm thick 120 mm PWM case fan with dual ball bearings and LCP blades delivering up to 114 CFM and 8.2 mmH₂O at 3000 RPM
The PCCOOLER F9 R120 BK is a 120mm case fan built for heavy-duty cooling scenarios. Its 30mm thickened frame and liquid crystal polymer construction provide structural rigidity for demanding airflow requirements. A three-phase Allegro permanent magnetic synchronous motor drives the impeller. It targets builders who need concentrated airflow in restricted spaces.
Low mode delivers 63 CFM at 2.2 mmH₂O, medium reaches 82 CFM at 4.2 mmH₂O, and high pushes 114 CFM at 8.2 mmH₂O. The variable-section blade design focuses air into a tight column for radiators or dense fin stacks. At 3000 RPM the fan saturates its pressure curve, so louder operation yields diminishing returns. It suits single-fan radiator mounts but cannot replace dual-fan arrays for high-wattage loads.
An NSK dual ball bearing supports the 500–3000 RPM range with a 42.7 dBA maximum noise rating at full speed. The 4-pin PWM connector allows the motherboard to scale speed automatically across the three preset bands. Anti-vibration pads decouple the 30mm frame from the chassis, reducing transmitted hum. The non-LED black finish keeps visual distraction to a minimum.
| Brand | PCCOOLER |
|---|---|
| Series | F9 |
| Model | F9 R120 BK |
| Part Number | F9R120-BKNC136-GL |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 30mm |
| Bearing Type | Daul Ball Bearing |
| RPM | L: 500~1500 RPM ± 10% M: 500~2150 RPM ± 10% H: 500~3000 RPM ± 10% |
| Air Flow | L: 63CFM Max M: 82CFM Max H: 114CFM Max |
| Air Pressure | L: 2.2 mmH₂O M: 4.2 mmH₂O H: 8.2 mmH₂O |
| Noise Level | 42.7 dBA Max |
| Power Connector | 4-pin PWM |
| Color | Black |
| LED | Non-LED |
| Dimensions | 120×120×30mm |
The frame measures 120×120×30 mm and uses a standard 4-pin PWM header, so it mounts in any 120 mm location and is controlled by both modern and legacy PWM-capable boards.
In BIOS or monitoring software, check that RPM sits between 500 and 3000 RPM ±10 % depending on the L, M or H mode selected; the curve should scale smoothly with temperature.
The package supplies one fan, four anti-vibration pads and four mounting screws — no extra hardware is required for a standard case installation.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?