Panorama Antennas
Panorama Antennas SH-IN2616-LC network antenna
A discrete shark-fin antenna covering 4G/5G from 617 MHz to 6 GHz, GPS/GNSS with 26 dB LNA gain, and optional WiFi 6 MiMo, all through a single roof hole
- Wide 5G coverage from 617 MHz to 6000 MHz
- 2×2 MiMo boosts 4G/5G throughput on the move
- Active GNSS with 26 dB LNA gain locks satellites fast
- Single-hole shark-fin mount cuts install time and vehicle damage
- Optional 4×4 WiFi 6 MiMo adds high-capacity local networking
617 MHz to 6000 MHz multi-band antenna
The Panorama Antennas SH-IN2616-LC is a sharkfin-style panel or roof-mountable antenna for vehicles. It covers cellular bands from 617 MHz to 960 MHz and 1710 MHz to 6000 MHz, plus GPS, GLONASS, Galileo and BeiDou with a 26 dB gain LNA. The housing integrates a 2x2 MiMo function for 4G and 5G and supports WiFi 6 with optional 2x2, 3x3 or 4x4 MiMo. A single-hole mount reduces vehicle damage and installation time.
Suits fleets needing one discreet housing
Installers who want a single aperture for 4G, 5G, GPS and WiFi 6 will benefit from the combined design. The omni-directional pattern works on metallic or non-metallic panels with similar performance. Buyers who need separate high-gain directional antennas for fixed-site use should look at a different product type. Those requiring a connector other than SMA must source an adapter separately.
Single-hole mount with SMA connection
Installation requires drilling one hole for the panel or roof mount, then routing the SMA cables to the router or modem. The compact sharkfin profile limits visual impact and snag risk. The most common issue is insufficient cable length for the chosen router location, so measure the run before cutting the hole. Ensure the mounting surface provides a solid ground plane for the GPS LNA to achieve the stated 26 dB gain.
Highlights
- Wide 5G coverage from 617 MHz to 6000 MHz
- 2×2 MiMo boosts 4G/5G throughput on the move
- Active GNSS with 26 dB LNA gain locks satellites fast
- Single-hole shark-fin mount cuts install time and vehicle damage
- Optional 4×4 WiFi 6 MiMo adds high-capacity local networking
Specifications
No published specifications for this item yet.
Questions about this item
What router or modem must I already have to use the two SMA connectors for 4G/5G on this antenna?
You need a router or modem with two SMA female ports that operates across 617–960 MHz and 1710–6000 MHz to match the antenna’s 2×2 MiMo cellular element.
Will the GPS receiver in this antenna work with a fleet tracker that only supports GPS and GLONASS?
Yes, the active GNSS element receives GPS, GLONASS, Galileo and BeiDou simultaneously, so a tracker using only GPS and GLONASS will still acquire a fix.
How can I verify the antenna is delivering its rated 9 dBi gain after roof-mount installation?
Compare the router’s reported RSRP or signal-strength bars before and after fitting the antenna; a consistent improvement across bands indicates the gain is being realised.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
