Panorama Antennas
Panorama Antennas GP-IN2850 network antenna 30 dB 698-960/1427-4900 MHz
Low-profile sharkfin antenna covers 698-960 MHz and 1427-4900 MHz with 30 dB gain for cellular and GPS use
- TypeAntenna
- Low-profile 52 mm height meets light-bar obscuration rules
- Four 4G LTE/5G NR elements cover 698-960/1427-4900 MHz
- Optional WiFi 6e elements add 2.4 and 5.150-7.125 GHz
- Optional L1/L5 GNSS module provides precise positioning
- 30 dB gain boosts cellular and GPS signal strength
Mobile Multi-Band Antenna Solution
The Panorama Antennas GP-IN2850 is a low-profile sharkfin antenna designed for vehicle roof mounting. It combines multiple frequency bands in a single housing for fleet and public-safety installations.
Suited For Fleet And Public Safety Vehicles
This antenna serves installers who need cellular, GPS and whip capability on one conductive roof panel. It is not for buyers who require a non-conductive mount without a ground plane or who need WiFi 6e elements that are not fitted to this unit.
30 dB Gain Across Dual Cellular Bands
The antenna delivers 30 dB gain across 698-960 MHz and 1427-4900 MHz ranges. UN ECE R118 approved pigtail cables are included and the 52 mm profile complies with light-bar obscuration limits.
Highlights
- Low-profile 52 mm height meets light-bar obscuration rules
- Four 4G LTE/5G NR elements cover 698-960/1427-4900 MHz
- Optional WiFi 6e elements add 2.4 and 5.150-7.125 GHz
- Optional L1/L5 GNSS module provides precise positioning
- 30 dB gain boosts cellular and GPS signal strength
Specifications
| Brand | Panorama |
|---|---|
| Model | GP-IN2850 |
| Part Number | GP-IN2850 |
| Type | Antenna |
| Shipping weight | 2.27 kg |
| Package size | 411 × 312 × 97 mm |
Questions about this item
Does the 30 dB gain antenna generate noticeable heat or draw significant power when operating continuously?
The antenna is a passive device with no internal amplifier, so it produces no heat and requires no power supply during continuous operation.
What existing equipment is needed to connect the GP-IN2850 to a cellular router or GPS receiver?
You need a router or modem with SMA or compatible RF connectors for the 4G/5G elements and a GPS receiver with an SMA port for the GNSS module, plus any required extension cables.
Will the whip antenna function on an older vehicle roof that lacks a conductive ground plane?
The whip requires a conductive ground plane for proper operation; on a non-conductive roof it will not perform correctly unless a ground-plane kit is added.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
