We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey anodised aluminium CPU corrector frame with L-shaped screwdriver

PANO-MOUNTS

PANO-MOUNTS Intel 12th Gen LGA1700 CPU Corrector Frame Grey

SKU CH-J8DW-DJDBG

An aluminium frame corrects Intel 12th generation LGA1700 CPU bending and fits H610, B660, Z690 motherboards

  • Specifications54x70x6mm
  • FeaturesHigh Compatibility
  • Corrects CPU bending on LGA1700 sockets
  • Fits Intel 12th gen H610 B660 Z690 chipsets
  • CNC anodized aluminium frame weighs 20 g
  • Simple screw mounting with included L-shaped driver
  • Grey finish matches four colour options

Intel 12th Gen LGA1700 Corrector

This CNC-machined aluminium frame corrects bending on Intel 12th generation processors installed in LGA1700 sockets. It supports motherboards using H610, B660 and Z690 chipsets. The 54x70x6 mm grey anodised body weighs 20 g and the complete kit including an L-shaped screwdriver and TF7 hardware weighs 55 g. Installation uses simple screws that attach directly to the motherboard.

Thermals and Power Impact

The corrector is a passive mechanical part so it adds no active cooling, draws no power and produces no noise. By keeping the CPU substrate flat it helps maintain consistent contact between the processor and the cooler cold plate. This can prevent localised hot-spots that sometimes appear when a bowed chip lifts away from the thermal interface material.

Build Integration

The frame mounts inside the standard LGA1700 retention mechanism and does not extend beyond the 54x70 mm footprint. It works with stock Intel coolers and most aftermarket air or liquid coolers that use the stock mounting holes. The included L-shaped screwdriver allows installation in tight spaces without removing the motherboard from the case. The kit is not suited for non-LGA1700 platforms or for builders who prefer the stock loading mechanism without additional hardware.

Highlights

  • Corrects CPU bending on LGA1700 sockets
  • Fits Intel 12th gen H610 B660 Z690 chipsets
  • CNC anodized aluminium frame weighs 20 g
  • Simple screw mounting with included L-shaped driver
  • Grey finish matches four colour options

Specifications

Specifications54x70x6mm
FeaturesHigh Compatibility

Questions about this item

How do I install the corrector frame on my LGA1700 motherboard, and which step do builders often miss?

Align the 54x70x6mm aluminium frame over the socket, insert the supplied screws through the mounting holes, and tighten them with the included L-shaped screwdriver; the step most people skip is torquing each screw evenly so the 20g main body seats flat without tilting.

What maintenance or replacement will the frame need after prolonged use?

The anodised aluminium frame itself requires no scheduled maintenance; only the two TF7 screws or the L-shaped screwdriver might need replacement if threads strip or the driver tip rounds off.

What is the first limit that appears when the CPU runs sustained heavy loads with this corrector fitted?

The frame is a passive mechanical bracket, so it has no thermal or electrical limit; the practical ceiling is the CPU’s own throttling point, which the corrector does not change.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.