We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black anodized aluminum CPU corrector frame, rectangular with mounting holes, includes L-shaped screwdriver

PANO-MOUNTS

PANO-MOUNTS CPU Corrector Frame LGA1700 Black 54x70x6mm

SKU CH-Y0MY-GTAGF

An aluminium frame that corrects LGA1700 CPU bending on Intel 12th generation H610, B660 and Z690 platforms

  • Specifications54x70x6mm
  • Corrects CPU bending on LGA1700 sockets
  • All-aluminium CNC frame weighs 20 g
  • Simple screw-on installation with included L-shaped driver
  • Compatible with H610, B660 and Z690 chipsets
  • Black anodised finish, four colour choices available

Intel 12th Gen LGA1700 Corrector Frame

This aluminium frame addresses CPU bending on Intel 12th generation processors installed in LGA1700 sockets. It is compatible with motherboards using H610, B660 and Z690 chipsets. The CNC-machined, anodised part weighs 20 g for the main body and 55 g total including the supplied L-shaped screwdriver and TF7 hardware. Builders seeking to maintain flat contact between the CPU and cooler will find it suited to that purpose.

Verify Socket And Cooler Clearance

Confirm the motherboard uses an LGA1700 socket and that the cooler mounting hardware can accommodate the additional 6 mm frame height. The frame measures 54x70x6 mm and attaches with simple screws, so ensure the retention mechanism has sufficient thread engagement. Systems running non-Intel 12th generation CPUs or different socket types cannot use this corrector.

Integrates Directly Under The Cooler

The frame sits between the processor and the cooler base, correcting warp without requiring motherboard removal in most cases. Its all-aluminium construction adds minimal mass while distributing clamping pressure evenly across the CPU heatspreader. Four anodised colour options allow visual coordination with the build theme. No additional tools beyond the included screwdriver are needed for installation.

Highlights

  • Corrects CPU bending on LGA1700 sockets
  • All-aluminium CNC frame weighs 20 g
  • Simple screw-on installation with included L-shaped driver
  • Compatible with H610, B660 and Z690 chipsets
  • Black anodised finish, four colour choices available

Specifications

Specifications54x70x6mm

Questions about this item

Does the frame ship with any tools, or must I supply my own screwdriver?

An L-shaped screwdriver and a TF7 bit are included, adding 2 g to the 55 g total package weight.

The listing mentions several colour choices — does the black version differ in size or weight from the others?

All four anodised colours share the same 54 x 70 x 6 mm aluminium body weighing 20 g, so black matches red, blue and grey exactly.

My motherboard uses an H610 chipset — will the corrector frame fit the LGA1700 socket without modification?

Yes, the frame is designed for LGA1700 sockets on H610, B660 and Z690 series boards and mounts with the supplied screws.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.