We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three black 120mm square case fans with infinity mirror ARGB rings and reverse airflow blades shown in a 3-pack arrangement

PANO-MOUNTS

PANO-MOUNTS 120mm Reverse Airflow ARGB Infinity Mirror Case Fans Black 3-Pack

SKU CH-BW3D-QZJS0

Three 120 mm reverse-airflow fans with hydraulic bearings, 800–1600 RPM PWM control and infinity-mirror ARGB lighting deliver 61.5 CFM in a 25 mm frame

  • Fan Size120mm
  • LEDARGB
  • TypeCase Fan
  • Bearing TypeHydraulic bearing
  • RPM800-1600RPM
  • Air Flow61.5CFM
  • Reverse airflow boosts cooling and cuts dust buildup
  • Infinity mirror ARGB creates a 3D lighting effect
  • PWM adjusts fan speed from 800 to 1600 RPM automatically
  • Hydraulic bearing runs quietly at up to 61.5 CFM airflow
  • Syncs with ASUS Aura Sync and Gigabyte RGB Fusion

120mm Reverse Airflow ARGB Fans

This three-pack of 120mm case fans uses a reverse airflow design with hydraulic bearings to push 61.5 CFM while spinning between 800 and 1600 RPM. Each 25mm thick frame carries addressable ARGB infinity mirror lighting on both the circular face and the side edges. A 4-pin PWM connector handles speed control and a separate 5V 3-pin header drives the LEDs.

Builders wanting infinity mirror lighting

The reverse blade layout suits radiators or intake positions where pulling air through a restrictive surface helps, and the infinity mirrors create a deep 3D glow that syncs with ASUS Aura Sync, Gigabyte RGB Fusion and similar 5V ARGB ecosystems. Buyers who need a bundled fan controller or prefer standard directional airflow should look elsewhere.

Hydraulic bearings and PWM curve under load

As system temperature rises the PWM curve ramps the fans from the quiet 800 RPM floor toward the 1600 RPM ceiling, keeping airflow steady at 61.5 CFM without sudden speed spikes. The hydraulic bearing maintains consistent torque during long sessions, so acoustic output stays predictable even when the loop is heat-soaked.

Highlights

  • Reverse airflow boosts cooling and cuts dust buildup
  • Infinity mirror ARGB creates a 3D lighting effect
  • PWM adjusts fan speed from 800 to 1600 RPM automatically
  • Hydraulic bearing runs quietly at up to 61.5 CFM airflow
  • Syncs with ASUS Aura Sync and Gigabyte RGB Fusion

Specifications

Fan Size120mm
LEDARGB
TypeCase Fan
Bearing TypeHydraulic bearing
RPM800-1600RPM
Air Flow61.5CFM
Noise LevelVariable
Power Connector4 Pin
ColorBlack
CompatibilityCase
Fan ControllerNo Controller
Fan Thickness25mm
FeaturesUnique Reverse Airflow Design
Dimensions120×120×25mm 4.72*4.72*0.98in

Questions about this item

Do I need a 5V 3-pin ARGB header on my motherboard to control the infinity mirror lighting?

Yes, the 5V 3-pin ARGB connector must plug into a compatible motherboard header or controller for addressable RGB sync.

Will the 4-pin PWM connectors work with older 3-pin fan headers on my board?

The 4-pin PWM plugs fit 3-pin headers but will run at full speed without PWM control.

How can I confirm the reverse airflow direction is correct after installation?

Air should exhaust through the frame side with the infinity mirror ring; the blade side becomes the intake.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.