We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red Cat 6 patch cable, 3 ft, RJ-45 connectors, snagless boots

Pannet

Pannet UTPSP3RDY network ethernet cable 3 ft red Cat 6

SKU CH-FCB8-DEV20 MPN UTPSP3RDY

A 3 ft red Cat 6 patch cable with snagless RJ-45 connectors for Gigabit Ethernet links

  • Category 6 performance for gigabit networks backed by ANSI/TIA-568-B.2-1 standard
  • Snagless boot design protects connector tabs during frequent moves
  • Red jacket colour simplifies cable identification in dense racks
  • 3 ft length keeps patch panels tidy without excess slack
  • Copper conductors meet ISO 11801 Class E and IEEE 802.3at specifications

Ready-to-use Cat 6 patch cable

The Pannet UTPSP3RDY is a factory-terminated Category 6 UTP patch cord with RJ-45 male connectors on both ends. It measures three feet and uses copper conductors inside a red jacket. The cable meets ANSI/TIA-568, ISO 11801 Class E and IEEE 802.3at requirements for gigabit Ethernet links.

Suited for short rack or desk runs

Installers who need a certified, snagless-booted patch lead for a switch-to-panel or switch-to-device connection will find the length and colour coding convenient. Builders who require longer reach, plenum rating, shielded construction or a different colour scheme should select another cable.

Snagless boots protect the latch

The moulded snagless boots prevent the locking tab from catching on adjacent cables during insertion or removal, reducing the chance of a broken connector. No software, drivers or additional hardware are bundled with this patch cord.

Highlights

  • Category 6 performance for gigabit networks backed by ANSI/TIA-568-B.2-1 standard
  • Snagless boot design protects connector tabs during frequent moves
  • Red jacket colour simplifies cable identification in dense racks
  • 3 ft length keeps patch panels tidy without excess slack
  • Copper conductors meet ISO 11801 Class E and IEEE 802.3at specifications

Specifications

No published specifications for this item yet.

Questions about this item

What devices need RJ-45 ports to use this Cat 6 patch cable?

Any network equipment with standard RJ-45 jacks — routers, switches, PCs, NAS units, IP cameras, or PoE devices compliant with IEEE 802.3at — will connect directly to the male connectors on both ends.

Will this Category 6 cable work with my older Cat 5e wall jacks and switch ports?

Yes. The cable meets ANSI/TIA/EIA-568-B.2-1 and ISO 11801 Class E, so it is fully backward compatible with Cat 5e and Cat 5 infrastructure while still supporting Gigabit speeds.

How can I confirm the link is running at Gigabit after I plug it in?

Check the link LEDs on both switch and NIC; a steady or blinking amber/green light typically indicates 1 Gbps negotiation per IEEE 802.3at, and the snagless boots should click securely into each RJ-45 port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.