We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue Cat6 patch cable with clear-boot RJ45 plugs on both ends, 30 ft

Pannet

Pannet UTPSP30BUY 30 ft network ethernet cable

SKU CH-BP52-03JGC MPN UTPSP30BUY

Category 6 UTP patch cable with RJ-45 connectors on both ends, 30 ft long, meeting ANSI/TIA/EIA-568-B.2-1 and ISO 11801 standards

  • 30 ft reach for flexible device placement
  • Category 6 copper conductors support gigabit speeds
  • Dual RJ-45 male connectors ensure universal compatibility
  • Blue jacket with clear boots simplifies cable identification
  • Meets ANSI/TIA-568, ISO 11801 and IEEE 802.3 standards

Pannet Category 6 Patch Cord

The Pannet UTPSP30BUY is a thirty foot Category 6 patch cable built with copper conductors and RJ-45 male connectors on both ends. It carries ANSI/TIA/EIA-568-B.2-1, ISO 11801 and IEEE 802.3 certifications for structured wiring installations. The blue jacket and clear boots make the cord easy to identify in dense patch panels. Suitable for gigabit Ethernet links in home or office networks.

Ideal for fixed gigabit links

This cord suits installers who need a certified Cat 6 patch lead for permanent desk or rack connections. Buyers who require longer runs beyond thirty feet should look at alternative lengths. It is not intended for outdoor burial or direct sunlight exposure. Users needing shielded construction for high EMI environments must select a different cable type.

Thirty foot certified Cat 6 length

The defining specification is the thirty foot length combined with Category 6 certification to ANSI/TIA/EIA-568-B.2-1 and ISO 11801. This exact reach determines whether the cable fits the planned drop without excess slack or tension. Verify the distance between your switch and device before ordering.

Highlights

  • 30 ft reach for flexible device placement
  • Category 6 copper conductors support gigabit speeds
  • Dual RJ-45 male connectors ensure universal compatibility
  • Blue jacket with clear boots simplifies cable identification
  • Meets ANSI/TIA-568, ISO 11801 and IEEE 802.3 standards

Specifications

No published specifications for this item yet.

Questions about this item

Does the Pannet UTPSP30BUY generate any noise, heat or draw power when running continuously?

The Pannet UTPSP30BUY is a passive copper patch cord with no active electronics, so it produces no noise, no heat and draws no power during operation.

What devices or ports must I already have to use this RJ-45 patch cable?

You need two devices with standard RJ-45 Ethernet ports — such as a router, switch, PC, NAS or IP camera — to plug each male connector into.

Will this Cat 6 cable work alongside my older Cat 5e or Cat 5 network gear?

Yes, the cable meets ANSI/TIA/EIA-568-B.2-1 and ISO 11801, so it interoperates with existing Cat 5e and Cat 5 installations at their rated speeds.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.