We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue Cat 6 patch cable, 1 ft, RJ-45 male ends, clear boots

Pannet

Pannet UTPSP1BUY network ethernet cable Cat 6 1 ft

SKU CH-TKB4-4RGF3 MPN UTPSP1BUY

A 1 ft Category 6 patch cable with RJ-45 male connectors on both ends for network device connections

  • Cat6
  • Length1 ft.
  • Category 6 performance for gigabit networks backed by ANSI/TIA-568-B.2-1 standard
  • One-foot blue patch cord with RJ-45 male connectors on both ends
  • Copper conductor ensures reliable signal transmission for network devices
  • Meets ISO 11801 and IEEE 802.3 specifications for structured cabling
  • Clear boots protect connector tabs during frequent plug and unplug cycles

Cat 6 patch cord for short runs

This one-foot Category 6 UTP patch cord connects two network devices with RJ-45 male plugs on each end. It suits installers and home users who need a tidy link between a switch, router or wall jack and a nearby computer or access point. The blue jacket and clear boots make the cable easy to identify in a crowded patch panel. Copper conductors carry the signal.

Standards compliance removes guesswork

The cord meets ANSI/TIA/EIA-568-B.2-1, ISO 11801, IEEE 802.3, ANSI/TIA-968-A and IEC 60603-7, so it is qualified for gigabit Ethernet and voice applications without further verification. No software or extra accessories are bundled; the cable itself is the complete product. Certification to those documents means the link will pass standard channel tests when installed correctly.

Moulded boots protect the latch day to day

Clear moulded boots shield the RJ-45 locking tabs from snagging when the cord is routed through cable managers or tight cabinet spaces. The flexible UTP construction bends cleanly around corners without kinking, and the 1 ft length keeps slack to a minimum in dense racks. Builders who need longer reach or shielded cable for noisy environments should choose a different part.

Highlights

  • Category 6 performance for gigabit networks backed by ANSI/TIA-568-B.2-1 standard
  • One-foot blue patch cord with RJ-45 male connectors on both ends
  • Copper conductor ensures reliable signal transmission for network devices
  • Meets ISO 11801 and IEEE 802.3 specifications for structured cabling
  • Clear boots protect connector tabs during frequent plug and unplug cycles

Specifications

BrandPanduit
Cat6
Length1 ft.
Shipping weight0.45 kg
Package size150 × 120 × 15 mm

Questions about this item

Will the RJ-45 connectors or copper conductors need replacement after repeated plugging?

The patch cord uses copper conductors and RJ-45 male connectors on both ends; replacement is only needed if a connector tab breaks or the cable is physically damaged.

What performance limit appears first when the cable runs at full speed continuously?

The cable meets ANSI/TIA/EIA-568-B.2-1 and ISO 11801 for Category 6, so the link speed of the connected network ports becomes the limiting factor.

Does the cable generate noticeable heat or draw extra power during all-day operation?

As a passive copper patch cord it draws no power and produces no measurable heat; the clear boots and blue jacket remain at ambient temperature.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.