We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green Cat6 UTP patch cable with slim 28 AWG stranded copper, 1.97 ft

Pannet

Pannet UTP28SP2GR Cat.6 network ethernet cable 1.97 ft

SKU CH-PHBA-FB6S5

Category 6 UTP patch cord with 28 AWG stranded copper conductors in a 1.97 ft length

  • Cat6
  • Length1.97 ft.
  • Category 6 performance for reliable gigabit networking
  • 28 AWG stranded copper conductors enable flexible routing
  • Dual-rated CM/LSZH jacket meets plenum and low-smoke requirements
  • High-performance modular plugs ensure secure connections
  • 97 ft length suits short-distance patching needs

Compact Category 6 patch lead

This Panduit Cat.6 UTP cable is a 1.97 ft patch cord built with 28 AWG stranded copper conductors and high-performance modular plugs. The small-diameter design saves space in dense patch panels and cable managers. It is rated CM/LSZH for general indoor use. The cord arrives new and ready for immediate installation.

Suited for short rack links, not long runs

Network technicians who need a flexible, low-profile jumper between adjacent switch ports or from a panel to a server will appreciate the slim profile. Installers pulling cables through tight conduit or long horizontal pathways should look at something else because the 28 AWG conductors are intended for short patching distances only. Buyers needing shielded construction for noisy environments must also choose a different cable type.

1.97 ft length defines the reach

The fixed 1.97 ft length is the single specification that decides whether this cord fits the physical gap between two ports. Measure the exact panel-to-device distance before ordering; a longer or shorter run will require a different patch cord. No other specification overrides this dimensional constraint.

Highlights

  • Category 6 performance for reliable gigabit networking
  • 28 AWG stranded copper conductors enable flexible routing
  • Dual-rated CM/LSZH jacket meets plenum and low-smoke requirements
  • High-performance modular plugs ensure secure connections
  • 97 ft length suits short-distance patching needs

Specifications

BrandPanduit
Cat6
Length1.97 ft.

Questions about this item

Does the 28 AWG stranded copper construction make the 1.97 ft patch cord noticeably warmer or noisier during continuous use?

The cable is passive copper with no active components, so it generates no noise and negligible heat even when carrying data all day.

What equipment must I already have to use this Category 6 patch cord?

You need two devices with standard 8P8C Ethernet ports such as a router, switch, PC or network-attached storage.

Will this Cat 6 cable work reliably alongside the older Cat 5e runs already in my rack?

Yes, it is fully backward compatible and will negotiate the highest speed both ends support.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.