Pannet
Pannet F92ERLNLNSNM005 fibre optic cable 2-fiber OS2 LC duplex riser 1.6mm
Two-fibre OS2 patch cord with LC duplex connectors, riser-rated 1.6 mm jacket
- TypeOthers
- Connector Number1
- OS2 single-mode fibre for long-distance links
- LC duplex connectors on both ends for simple patching
- Riser-rated OFNR jacket meets vertical-run codes
- 6 mm jacket protects fibres in tight pathways
- Standard insertion loss keeps signal quality high
Patch cord for single-mode links
This 2-fiber OS2 duplex patch cord uses LC connectors on both ends and a riser-rated 1.6mm jacket. It is built for indoor backbone runs between patch panels or network equipment. Installers working on campus or data-centre single-mode links will find it matches standard insertion-loss specs.
Simple LC duplex connection
The LC duplex clips snap into standard transceivers and adapter panels without tools. Riser rating (OFNR) means the cable is approved for vertical shafts, but it is not plenum-rated for air-handling spaces. The 1.6mm jacket is slim, so tight bends inside crowded cabinets can exceed the minimum bend radius if not managed.
Verify link budget and jacket rating
Confirm the link budget allows standard insertion loss for the planned distance. Ensure the pathway requires OFNR rather than OFNP plenum rating. Check that both ends use LC duplex ports and that the 1.6mm diameter fits the cable management and conduit fill limits in your installation.
Highlights
- OS2 single-mode fibre for long-distance links
- LC duplex connectors on both ends for simple patching
- Riser-rated OFNR jacket meets vertical-run codes
- 6 mm jacket protects fibres in tight pathways
- Standard insertion loss keeps signal quality high
Specifications
| Brand | Panduit |
|---|---|
| Type | Others |
| Connector Number | 1 |
| Shipping weight | 0.45 kg |
| Package size | 350 × 150 × 15 mm |
Questions about this item
How do I confirm the 2-fiber OS2 patch cord is working after installation?
Connect the LC duplex ends and verify the link light on the attached transceivers shows a stable signal.
What comes with the F92ERLNLNSNM005 cable and what must I source separately?
The riser-rated 1.6 mm jacketed duplex patch cord is supplied; LC transceivers or adapter panels are not included.
Which version of this OS2 duplex cord should I choose for a standard riser run?
Select the 5 m length identified by part number F92ERLNLNSNM005 for typical patch-panel to equipment connections.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114365BTC
In stock
