We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Cat6 UTP patch cable 25 ft with clear RJ45 boots

Pannet

Pannet Cat.6 UTP Patch Cord 25 ft Black UTPSP25BLY

SKU CH-E729-P709J

Category 6 UTP patch cable with RJ-45 male connectors on both ends, 25 ft black copper conductor, meeting ANSI/TIA-568-B.2-1, ISO 11801 and IEEE 802.3 standards

  • Cat6
  • Length25 ft.
  • Cat.6 rating supports gigabit Ethernet speeds
  • 25 ft length reaches distant network devices
  • RJ-45 male connectors on both ends plug straight in
  • Copper conductors carry signals with low loss
  • Meets ANSI/TIA-568 and ISO 11801 standards

Category 6 UTP patch cord

This 25 ft Category 6 UTP patch cord uses copper conductors and RJ-45 male connectors on both ends. It meets ANSI/TIA/EIA-568-B.2-1, ISO 11801, IEEE 802.3, ANSI/TIA-968-A and IEC 60603-7. The cable is suited for standard Ethernet connections in home or office networks. Black jacket with clear boots aids visual identification.

Thermals noise and power

Passive copper construction produces no heat and requires no power during normal operation. There are no active components to generate noise, so the cord adds zero acoustic load to the environment. Signal integrity is maintained within the Category 6 specification across the full 25 ft length. Performance depends on the connected equipment and installation quality.

Build quality and connectors

Moulded RJ-45 plugs with clear strain-relief boots protect the terminations from bending stress during repeated insertion. The black PVC jacket resists abrasion in typical indoor routing scenarios. Both ends are wired to the same pinout for straight-through patching between switches, routers and end devices. Not intended for outdoor, plenum or direct-burial use.

Highlights

  • Cat.6 rating supports gigabit Ethernet speeds
  • 25 ft length reaches distant network devices
  • RJ-45 male connectors on both ends plug straight in
  • Copper conductors carry signals with low loss
  • Meets ANSI/TIA-568 and ISO 11801 standards

Specifications

BrandPanduit
Cat6
Length25 ft.

Questions about this item

How do I install the 25 ft Cat.6 patch cord, and what step is often missed?

Plug each RJ-45 male connector firmly until the latch clicks; the step often missed is verifying both boots are fully seated so the latch engages completely.

What maintenance or replacement will the cable need over time?

Inspect the clear boots and RJ-45 contacts periodically; replace the cord if the latch tabs break, the boots crack, or the copper conductors show corrosion.

What limit appears first during sustained high-throughput use?

The ANSI/TIA/EIA-568-B.2-1 and ISO 11801 Cat.6 ratings define the performance ceiling; sustained loads will hit the cable’s certified bandwidth and insertion-loss limits before any other factor.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.