We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow heat-shrink butt splice connectors, pack of 20

Panduit

Panduit Butt Splice Connector 12 to 10 AWG PK20

SKU CH-HGKF-F6VHD

Heat-shrink butt splice connectors for 12 to 10 AWG wire, tin-plated copper barrels, 600 V rating, pack of 20

  • MaterialHAWA
  • Heat-shrink insulation seals out moisture and corrosion
  • Crimp barrel accepts 12 to 10 AWG wire sizes
  • Tin-plated copper barrel resists oxidation for reliable conductivity
  • UL 486C and CSA 22.2 No. 65 listed for code compliance
  • Pack of 20 connectors covers multiple splice jobs

Electrical butt splice for 12–10 AWG

These Panduit connectors join two wires of the same gauge inside a heat-shrink sleeve. Each pack contains twenty pieces, suited for automotive, marine or industrial maintenance where a sealed crimp joint is required.

Heat-shrink insulation rated to 230 °F

The yellow sleeve shrinks around the crimped barrel to seal out moisture and resist temperatures up to 230 degrees Fahrenheit. Tin-plated copper barrels accept 12 to 10 AWG conductors and are rated for 600 volts.

Twenty connectors handle multiple repairs

One pack covers several splice points on a single vehicle or vessel. The 1.64-inch overall length fits tight harnesses, while the seamless barrel and ABS, CSA 22.2 No. 65 and UL 486C listings confirm code compliance. Builders needing larger-gauge splices or non-insulated terminals must choose a different product.

Highlights

  • Heat-shrink insulation seals out moisture and corrosion
  • Crimp barrel accepts 12 to 10 AWG wire sizes
  • Tin-plated copper barrel resists oxidation for reliable conductivity
  • UL 486C and CSA 22.2 No. 65 listed for code compliance
  • Pack of 20 connectors covers multiple splice jobs

Specifications

BrandPanduit
MaterialHAWA

Questions about this item

What wire gauges does the 12 to 10 AWG rating cover in a real installation?

The connector accepts solid or stranded copper conductors from 12 AWG up to 10 AWG, matching the stated wire range for crimp termination.

How does the 600 V maximum voltage limit what circuits I can use these splices on?

The 600 V rating means the butt splice is approved for low-voltage power and control circuits up to that potential, per the UL 486C and CSA 22.2 No. 65 standards listed.

What crimp tool and clearance do I need for the 0.24 in barrel diameter and 1.64 in overall length?

Use a crimp die sized for 12–10 AWG heat-shrink butt splices; the barrel ID is 0.24 in and the finished splice measures 1.64 in long, so allow that space in the harness.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.