We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal wall mount for 3/4 inch conduit with tilt and rotation joints

PanaVise

PanaVise 847-3/4 Mount for 3/4" Conduit Silver

SKU CH-VT9P-B9ZAN

Wall mount for 3/4" conduit holding cameras up to 1.4 kg with 210° tilt, 360° turn and rotation, 3.5" flange-to-shaft length

  • TypeWall Mount
  • Secure 3 lb cameras on ¾" conduit with steel locknuts included
  • 210° tilt plus full 360° pan and rotation for precise aiming
  • 5" offset from flange centers clears obstacles on long drops
  • Knob or set-screw adjustment gives installers two tightening choices
  • Compact 3.125" overall length fits tight ceiling spaces

Silver conduit mount for 3/4" pipe

The PanaVise 847 mount clamps to 19.1 mm conduit or NPT pipe and holds CCTV cameras up to 1.4 kg. A 1/4-20 stud with lockring secures the camera while an adjusting point delivers 210° tilt, 360° turn and 360° rotation. Both knob and set-screw adjusters are included for installer preference.

Replaces fixed brackets on long drops

This mount replaces rigid wall brackets when the camera must hang from extended conduit runs in warehouses, convention centres or auditoriums. The 3.5 inch centre-to-centre length and 3.125 inch overall length keep the camera clear of the mounting surface. Two steel conduit locknuts are supplied so the assembly is ready for pipe of any length.

Holds position under constant vibration

The steel locknuts and dual adjusting options lock the camera angle so it does not drift when building systems vibrate or when conduit flexes over long spans. Tilt, turn and rotation stay fixed without periodic re-tightening, keeping the field of view stable for continuous recording.

Highlights

  • Secure 3 lb cameras on ¾" conduit with steel locknuts included
  • 210° tilt plus full 360° pan and rotation for precise aiming
  • 5" offset from flange centers clears obstacles on long drops
  • Knob or set-screw adjustment gives installers two tightening choices
  • Compact 3.125" overall length fits tight ceiling spaces

Specifications

BrandPanaVise
TypeWall Mount

Questions about this item

What size conduit or pipe does the 847 mount accept?

It fits 3/4-inch conduit or NPT pipe with a 19.1 mm outside diameter.

How do you secure the camera to the 1/4-20 stud and which adjuster should be tightened first?

Thread the camera onto the 1/4-20 stud, tighten the lockring, then use either the knob or the set-screw to lock the 210-degree tilt and 360-degree rotation.

Will the two included steel conduit locknuts need replacement over time?

The two supplied steel locknuts are reusable; replace them only if the threads strip or corrosion appears.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.