We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

PANAMAX

PANAMAX M4320-PRO power strip 20A 120V 9 outlets 19in rack

SKU CH-5G18-WYS2X MPN M4320-PRO

Nine-outlet 20 A rack-mount power strip with linear filtration, four isolated banks, BlueBOLT IP control, volt/amp meter, and LAN/telco surge protection

  • TypePower Strips - Inverters and Converters
  • ColorBlack
  • Eight programmable outlets via RS-232C or BlueBOLT
  • Linear filtration across four isolated outlet banks protects connected gear
  • Two front-panel reboot buttons allow quick power cycling
  • 19-inch rack-mount chassis with integrated ears fits standard cabinets
  • 20 A capacity with 2700 J surge rating handles heavy loads

Rack-mount power conditioner for 19-inch cabinets

The PANAMAX M4320-PRO is a 19-inch rack-mount power strip delivering 20 A at 120 VAC across nine outlets. Four isolated banks provide linear filtration for connected equipment. Integrated rack ears and a full-depth metal chassis simplify installation in standard cabinets.

Replaces basic strips lacking surge protection

Upgrade when you need 2700 joules of energy dissipation and a 135000 A peak impulse current rating. The unit adds RS-232C and BlueBOLT IP monitoring plus two front-panel reboot buttons for remote power cycling. Auto-resetting under-voltage and over-voltage shutoffs engage at 100 VAC and 134 VAC respectively.

Verify 20 A branch circuit

Confirm your panel supplies a dedicated 20 A circuit with a matching breaker. Ensure the cabinet offers at least 12.25 inches of usable depth for the chassis. Check that RS-232C or Ethernet access is available for BlueBOLT management if remote monitoring is required.

Highlights

  • Eight programmable outlets via RS-232C or BlueBOLT
  • Linear filtration across four isolated outlet banks protects connected gear
  • Two front-panel reboot buttons allow quick power cycling
  • 19-inch rack-mount chassis with integrated ears fits standard cabinets
  • 20 A capacity with 2700 J surge rating handles heavy loads

Specifications

BrandPANAMAX
TypePower Strips - Inverters and Converters
ColorBlack
Shipping weight5.90 kg
Package size305 × 305 × 305 mm

Questions about this item

What rack depth and height does the 19-inch M4320-PRO require?

The unit measures 12.25 inches deep and 1.75 inches high, fitting a standard 19-inch rack with integrated ears.

How do I connect the BlueBOLT RS-232 card for IP control, and what step is often missed?

Install the included RS-232 communication card into the rear slot before powering on; the card ships uninstalled and must be seated for network monitoring.

When should the 2700-joule surge protection be considered spent?

The catastrophic surge circuit disconnects power after a major event; if the unit stops supplying power, the protection has been exhausted and the strip must be replaced.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.