We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small metallic SFP+ transceiver with an RJ-45 port, silver finish, labelled 10GBASE-T 30m

Other Electricities

Other Electricities SFP+ 10GBASE-T RJ-45 30m Transceiver

SKU CH-HT20-6NRFF

An SFP+ copper transceiver providing 10 Gbps over RJ-45 up to 30 metres using Cat6a or Cat7 cabling

  • TypeRack Mount Enclosure
  • 10Gbps throughput over copper up to 30 metres
  • SFP+ form factor fits standard switch ports
  • 9W power draw keeps rack thermals low
  • RJ-45 connector uses familiar Cat6a or Cat7 cabling
  • Commercial 0 to 70°C range suits data-centre aisles

Transceiver for 10GBASE-T networks

This SFP+ module adds a 10 Gbps RJ-45 port to compatible switches and servers. It supports copper cabling up to 30 metres on Cat6a or Cat7 links. The transceiver operates across a commercial temperature range of 0 to 70°C.

Distance and cabling limits

Maximum reach is 30 metres and requires Cat6a, Cat7 or better copper cable. Shorter runs on lower-grade cable are not guaranteed by the specification. The module draws 2.9 W and complies with IEEE 802.3an and IEEE 802.3az standards.

Intel E10GSFPT compatible form factor

The module follows the SFP+ MSA and SFF-8431 mechanical and electrical definitions. It is built as a direct replacement for the Intel E10GSFPT part number. Buyers needing a different vendor-coded transceiver or fibre interface cannot use this unit.

Highlights

  • 10Gbps throughput over copper up to 30 metres
  • SFP+ form factor fits standard switch ports
  • 9W power draw keeps rack thermals low
  • RJ-45 connector uses familiar Cat6a or Cat7 cabling
  • Commercial 0 to 70°C range suits data-centre aisles

Specifications

TypeRack Mount Enclosure

Questions about this item

Should I pick a different reach or data-rate version for my rack?

This module is a single 10 Gbps SFP+ copper transceiver rated for 30 m over Cat6a or Cat7; no other reach or speed variants are listed for this product.

What does the 10 Gbps rating mean once the transceiver is installed in a switch?

It delivers a full-duplex 10 Gbps Ethernet link over RJ-45 copper up to 30 m while drawing 2.9 W and operating from 0 to 70 °C.

Which interface standard governs the SFP+ slot and what does it cap in practice?

The SFF-8431 SFP+ MSA defines the mechanical and electrical interface, limiting the module to 10 Gbps over copper at the specified 30 m distance.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.