We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve yellow single-mode fiber pigtails with SC/UPC connectors, three metres long

Other Electricities

Other Electricities 12 Strand 9/125 SC/UPC Single Mode Pigtails 3m

SKU CH-5DJY-FT41Q

A set of twelve single-mode fibre pigtails with SC/UPC connectors, 3 m long, 9/125 µm OS2, insertion loss 0.3 dB and interchangeability 0.2 dB rated for over 1000 mating cycles

  • TypeRack Enclosure
  • 12 fibers ready for high-density patching
  • SC/UPC connectors deliver 0.3 dB insertion loss
  • OS2 single-mode supports 1310 nm and 1550 nm wavelengths
  • 3 m length simplifies rack-to-panel routing
  • Rated for over 1000 mating cycles

12-Strand Single-Mode Fiber Pigtails

These 12-strand single-mode fiber pigtails provide factory-terminated SC/UPC connectors on one end and unterminated fibers on the other. They are built for splicing into backbone cables inside server racks, patch panels or distribution frames. The 3-metre length gives installers slack for routing and fusion splicing.

0.3 dB Insertion Loss Specifies Performance

Each fiber meets a maximum insertion loss of 0.3 dB and an interchangeability figure of 0.2 dB. The 9/125 µm OS2 glass supports 1310 nm and 1550 nm wavelengths for long-haul and metro networks. Yellow jackets identify the single-mode type at a glance.

Suits Installers Splicing Into Existing Cable Plant

Technicians who need pre-polished SC/UPC ends for rapid fusion splicing will use these pigtails. Buyers who require factory-terminated connectors on both ends, or who need multi-mode OM3/OM4 fiber, should look at a different product.

Highlights

  • 12 fibers ready for high-density patching
  • SC/UPC connectors deliver 0.3 dB insertion loss
  • OS2 single-mode supports 1310 nm and 1550 nm wavelengths
  • 3 m length simplifies rack-to-panel routing
  • Rated for over 1000 mating cycles

Specifications

TypeRack Enclosure

Questions about this item

What does the 0.3 dB insertion loss mean for my link budget?

Each SC connector adds up to 0.3 dB of loss, so a 12-strand run contributes a total of 3.6 dB across all fibres.

What does the SC/UPC interface cap in practice?

The UPC polish on SC ferrules limits return loss to around 50 dB and keeps insertion loss at or below the stated 0.3 dB per connection.

What physical space do 12 SC pigtails with 3 m fan-out need?

Twelve 3-metre bare fibres need a splice tray or cassette deep enough for the fan-out and a patch panel with 12 SC adapter ports.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.