We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact SFP+ transceiver module with silver metal housing and dual LC optical ports

Other Electricities

Other Electricities 10GBASE-LR SFP+ 1310nm 10km DOM module

SKU CH-YZMN-0PB7B

A 10.3125 Gbps SFP+ transceiver for 10 km single-mode fibre links at 1310 nm with LC duplex interface and digital optical monitoring

  • Typesfp+
  • 3125 Gbps data rate for high-speed 10G links
  • 10 km reach over single-mode fibre at 1310 nm
  • LC duplex interface for standard patch-panel connectivity
  • Digital optical monitoring gives real-time power and temperature data
  • Operates from 0 to 70 °C (32 to 158 °F) in commercial environments

Compatible SFP+ module for HP J9151A X132

This transceiver is built as a direct replacement for the HP J9151A X132 part. It fits any SFP+ slot that accepts the original module and supports 10 Gigabit Ethernet links over single-mode fibre. Network operators use it to extend connections between switches or routers across campus or metro distances. The LC duplex interface matches existing patch cords without adapter changes.

Sustained operation across commercial temperature

The module is rated for continuous use from 0 to 70 °C (32 to 158 °F) without performance loss. Digital optical monitoring reports real-time temperature, voltage, and optical power so operators can track link health during long runs. Transmit power stays between -8.2 and 0.5 dBm while receiver sensitivity reaches below -14.4 dBm, keeping the error rate low over the full 10 km span.

10 km reach at 1310 nm on single-mode fibre

The 1310 nm DFB laser drives a 10.3125 Gbps signal up to 10 kilometres over standard SMF cable. This distance specification is the deciding factor: shorter-reach SR modules will not cover the link, while longer-reach ER or ZX optics add unnecessary cost. If your fibre run exceeds 10 km, this module is not the correct choice.

Highlights

  • 3125 Gbps data rate for high-speed 10G links
  • 10 km reach over single-mode fibre at 1310 nm
  • LC duplex interface for standard patch-panel connectivity
  • Digital optical monitoring gives real-time power and temperature data
  • Operates from 0 to 70 °C (32 to 158 °F) in commercial environments

Specifications

Typesfp+

Questions about this item

How much heat does the module generate when running continuously at 10.3125Gbps?

It operates within a commercial temperature range of 0 to 70°C (32 to 158°F) without active cooling.

What cabling and patch cords must I already have to use this SFP+ module?

You need single-mode fibre with LC duplex connectors to match the 1310nm DFB optics.

Will this module link with older 1Gb SFP ports on my existing switches?

No, the 10.3125Gbps data rate requires 10GbE SFP+ ports; it will not negotiate down to 1GbE.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.