We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

OSD Audio OSD-SP14-500-BLK 14 AWG 2 Conductor Speaker Wire 100ft Black

SKU CH-27FX-YEW03

14 AWG two-conductor oxygen-free copper speaker wire on a 100-foot spool, CL3-rated for in-wall and direct-burial use with UV-resistant jacket

  • TypeSpeaker Wire
  • ColorBlack
  • Length100 feet
  • Terminal GenderMale-to-Male
  • Oxygen-free copper strands deliver clear sound over 100 feet
  • UV-resistant jacket protects the cable for direct-burial and outdoor use
  • CL2/CL3 rating meets in-wall and commercial building-code requirements
  • Snag-free spool design with tissue-wrapped conductors speeds up cable pulls
  • 14 AWG two-conductor construction handles long runs with minimal signal loss

Built for long in-wall and direct-burial runs

This 14 AWG two-conductor speaker wire uses oxygen-free copper and a UV-resistant, moisture-sealing jacket rated CL3 and FT4 for in-wall and outdoor burial use. The 100 foot spool is designed for snag-free pulling with tissue-wrapped conductors and a large payout hole. It suits installers who need code-compliant cable for whole-home audio or commercial background-music systems.

Not for patch leads or tight indoor jumpers

Buyers who only need a short connection between an amplifier and nearby bookshelf speakers will find this bulk spool unwieldy and the heavy jacket unnecessarily stiff. Installers who require four-conductor cable for bi-wiring or multi-zone distribution should select a different construction.

14 AWG gauge over 100 feet

The 14 gauge conductor size is the specification that determines whether voltage drop stays acceptable for the amplifier power and speaker impedance in your installation.

Highlights

  • Oxygen-free copper strands deliver clear sound over 100 feet
  • UV-resistant jacket protects the cable for direct-burial and outdoor use
  • CL2/CL3 rating meets in-wall and commercial building-code requirements
  • Snag-free spool design with tissue-wrapped conductors speeds up cable pulls
  • 14 AWG two-conductor construction handles long runs with minimal signal loss

Specifications

BrandOSD Audio
ModelOSD-SP14-500-BLK
TypeSpeaker Wire
ColorBlack
Length100 feet
Terminal GenderMale-to-Male

Questions about this item

What diameter conduit or raceway is needed for this 14 AWG speaker wire?

The wire uses a 14 AWG two-conductor design with a UV-resistant polyethylene jacket; size the conduit to fit that outer diameter and any local code fill limits.

How do you strip the tissue-wrapped conductors without nicking the oxygen-free copper strands?

Pull the wire from the spool's large payout hole, cut the required length, then use a 14 AWG stripper setting to slice through the polypropylene sheath and tissue wrap in one motion.

When should the CL3R-rated jacket be inspected or the wire replaced after direct burial?

Check the UV-resistant jacket at any exposed ends or splice points annually; replace the run if the polyethylene shows cracking, discoloration or moisture ingress.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.