We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five blue SATA cables with locking latches

ORVIX

ORVIX SATA III cable 5-pack 8-inch 6.0 Gbps locking latch blue

SKU CH-7HYE-TE1CY

Five 8-inch SATA 3.0 cables with locking latches for 6.0 Gbps drives in small builds

  • SATA 3.0 delivers up to 6.0 Gbps throughput
  • Locking latch on each end prevents accidental disconnection
  • 8-inch length suits Mini-ITX and Intel NUC builds
  • Backwards compatible with SATA 1 and 2 devices
  • Five cables included for multiple drive connections

Five-cable SATA III pack

This ORVIX set supplies five SATA revision 3.0 cables rated for 6.0 Gbps throughput. Each 8-inch lead connects motherboards or host controllers to internal hard drives and optical drives. The short 0.2 m length suits Mini ITX, Intel NUC and other small-form-factor builds. Blue sheathing makes the cables easy to identify inside a crowded chassis.

Locking latches and tight routing

Straight-to-straight connectors with a locking latch on each end prevent accidental disconnection during transport or vibration. The compact 8-inch span reduces clutter but leaves no slack for wide component spacing. Installers should verify that drive and header positions match the fixed length before closing the case. Backwards compatibility with SATA revision 1 and 2 ensures the cables work with older ports.

Builders of compact systems

The pack targets anyone assembling or upgrading Mini ITX, NUC or similarly space-constrained PCs where standard cables are too long. Users needing longer reach for full-size ATX layouts, right-angle connectors for tight header clearance, or single cables instead of a five-pack should consider other options. The locking design benefits mobile or frequently moved rigs where vibration is a concern.

Highlights

  • SATA 3.0 delivers up to 6.0 Gbps throughput
  • Locking latch on each end prevents accidental disconnection
  • 8-inch length suits Mini-ITX and Intel NUC builds
  • Backwards compatible with SATA 1 and 2 devices
  • Five cables included for multiple drive connections

Specifications

BrandORVIX

Questions about this item

How can I confirm the cables are running at 6.0 Gbps after installation?

The cables support SATA revision 3.0; your motherboard BIOS or operating-system drive information will report the negotiated link speed as 6 Gbps when the connected drive also supports that revision.

What comes in the pack and do I need any extra parts?

The pack contains five 8-inch SATA III cables with locking latches on both ends; no additional components are required for a standard internal drive connection.

Which cable length should I choose for a Mini ITX build?

The 8-inch (0.2 m) length is designed for Mini ITX, Intel NUC and other small form factor systems where longer cables would be difficult to route.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.