We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 80 mm square case fan with black blades and frame, four-pin PWM connector visible

ORVIX

ORVIX P8 Max 80 mm PWM 500-5000 RPM Black case fan

SKU CH-YXWM-87M6G

An 80 mm PWM case fan with a 500-5000 RPM range and double ball bearing for high static pressure in servers and radiators

  • NMB double ball bearing extends service life and performance
  • PWM control enables 500-5000 RPM speed range with 0dB mode below 5%
  • High static pressure optimises cooling for radiators and dense 2U server racks
  • Most powerful 80 mm fan backed by 25 years of experience
  • Direct customer support and long-term spare parts availability

80 mm PWM case fan for high static pressure

The ORVIX P8 Max is an 80 mm case fan built for environments where airflow meets resistance. Its PWM control allows speed adjustment from 500 to 5000 RPM. An NMB double ball bearing supports long service life. The fan stops below 5 % PWM duty cycle for silent operation.

Verify 80 mm mount and 4-pin PWM header

Confirm your chassis or heatsink has an 80 mm mounting pattern before ordering. The fan requires a standard 4-pin PWM header on the motherboard or fan controller for speed regulation. Without PWM control the fan will not reach its specified RPM range or 0 dB stop function.

Fits 2U server racks and dense heatsinks

High static pressure makes this fan effective on radiators and tightly stacked components typical of 2U server racks. The compact 80 mm frame leaves room for adjacent hardware in dense builds. Direct customer support and long-term spare parts availability are offered by the manufacturer.

Highlights

  • NMB double ball bearing extends service life and performance
  • PWM control enables 500-5000 RPM speed range with 0dB mode below 5%
  • High static pressure optimises cooling for radiators and dense 2U server racks
  • Most powerful 80 mm fan backed by 25 years of experience
  • Direct customer support and long-term spare parts availability

Specifications

BrandORVIX

Questions about this item

What comes with the ORVIX P8 Max 80 mm fan and what must I buy separately?

The fan ships as a single unit with its 4-pin PWM connector attached. Mounting screws for 80 mm frames are not included and must be sourced separately.

How do I choose between the speed settings of the 500-5000 RPM range?

The 4-pin PWM header lets the motherboard or fan controller vary speed continuously. Below 5 % duty cycle the fan stops; above that it scales smoothly from 500 to 5000 RPM to match cooling demand.

What does the 5000 RPM headline figure deliver inside a 2U server rack?

At 5000 RPM the NMB double ball bearing fan produces high static pressure, forcing air through dense heatsinks or radiators in a 2U chassis where component spacing is tight.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.