We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four black aluminium M.2 NVMe heatsinks with thermal pads, 70x22mm each

ORVIX

ORVIX M.2 NVME Heatsink Aluminium 4pcs Black 70x22mm

SKU CH-S4RK-PWFS9

Aluminium heatsinks with thermal pads fit 70×22 mm M.2 NVMe SSDs and lower temperatures by 5-20 °C

  • Keeps SSD temperatures down with 5°C to 20°C cooling effect
  • Vertical and horizontal grooves enlarge heat-dissipation area
  • Fits 2280 NVMe drives measuring 70 mm by 22 mm
  • Includes thermal pads to bridge chip and heatsink heights
  • Four black aluminium heatsinks per pack for multiple installations

ORVIX M.2 NVMe Heatsink Set

This four-piece aluminium heatsink kit is designed for M.2 NVMe solid-state drives. Each unit measures 70 by 22 by 3 millimetres and includes a thermal pad sized at approximately 70 by 20 by 1 millimetre. The grooved vertical and horizontal layout increases surface area to draw heat away from the controller and memory chips.

Suits standard 2280 modules only

Builders fitting a 2280 form-factor NVMe drive can use these heatsinks directly. The 70-millimetre length matches the main chip area on 80-millimetre boards. Installers working with shorter 2230 or 2242 modules, or with drives whose controller exceeds 22 millimetres in width, will need a different cooler.

Critical dimension is 70 by 22 millimetres

Before purchasing, measure the controller and flash package on the target SSD to confirm they fit within the 70 by 22 millimetre footprint. The supplied thermal pads fill height differences between components and the heatsink base. A mismatch in either length or width prevents proper contact and reduces the cooling benefit.

Highlights

  • Keeps SSD temperatures down with 5°C to 20°C cooling effect
  • Vertical and horizontal grooves enlarge heat-dissipation area
  • Fits 2280 NVMe drives measuring 70 mm by 22 mm
  • Includes thermal pads to bridge chip and heatsink heights
  • Four black aluminium heatsinks per pack for multiple installations

Specifications

BrandORVIX

Questions about this item

How much can the 5 °C – 20 °C cooling range actually lower my NVMe SSD temperature inside a case?

The heatsink adds vertical and horizontal grooves that increase surface area, dropping drive temps by roughly 5 °C to 20 °C depending on airflow and ambient temperature.

Does the M.2 2280 form factor limit this cooler to PCIe NVMe drives only?

The 70 mm × 22 mm aluminium block fits the 2280 length and works with both NGFF and NVMe M.2 modules that match those dimensions.

Will the 70 mm × 22 mm × 3 mm heatsink and 1 mm thermal pads clear my motherboard’s M.2 slot and any nearby components?

The low-profile 3 mm fin stack plus 1 mm pads sit just 4 mm above the PCB, fitting most desktop and laptop M.2 slots without fouling adjacent headers or shrouds.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.