Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00081248BTC
In stock
Orion Motor Tech 1/8 NPT 0-100 PSI Oil Fuel Pressure Sensor Transducer Sender with Harness Kit
1/8 NPT stainless steel sensor measures oil or fuel pressure from 0 to 100 psi with ±1% accuracy and a 3 ms response
- FeaturesRugged, Stainless Steel, Threaded Mount, electrical signal,
- Height2.7 L x 11.2 W x 12.4 H centimeters
- Width2.7 L x 11.2 W x 12.4 H centimeters
- Length2.7 L x 11.2 W x 12.4 H centimeters
- Accurate monitoring with ±1% precision across 0-100 psi range
- Fast 3ms response captures rapid pressure changes in real time
- Durable 316 stainless steel body resists heat and corrosion
- IP65 rating protects against dust and water in harsh conditions
- Plug-and-play 1/8-27 NPT thread with included harness for quick install
1/8 NPT Oil Fuel Pressure Sensor
The Orion Motor Tech transducer measures 0 to 100 psi and suits vehicles needing a replacement sender for fuel oil air or water systems. It outputs a 0.5V to 4.5V linear signal powered by a 5 to 16 volt supply. The 316 stainless steel body resists high temperature and corrosion with an IP65 rating and a 500000 cycle life.
Threaded Mount Installation
The 1/8 -27 NPT thread allows direct fitment into existing ports and the included harness enables plug and play wiring. Response time is 3 milliseconds so readings update quickly. Common issues include cross threading the stainless body or damaging the connector if the harness is routed near hot surfaces.
DIY Vehicle Owners and Mechanics
This sensor suits owners replacing a failed OE transmitter who want a rugged stainless unit with a wide operating range. It is not for buyers needing a different thread size pressure range or output protocol such as current loop or digital bus. It also does not suit applications requiring a sender with a built in gauge or warning light driver.
Highlights
- Accurate monitoring with ±1% precision across 0-100 psi range
- Fast 3ms response captures rapid pressure changes in real time
- Durable 316 stainless steel body resists heat and corrosion
- IP65 rating protects against dust and water in harsh conditions
- Plug-and-play 1/8-27 NPT thread with included harness for quick install
Specifications
| Brand | Orion Motor Tech |
|---|---|
| Features | Rugged, Stainless Steel, Threaded Mount, electrical signal, 0 - 100 psi, ±1%, 3 milliseconds, 16 volts |
| Height | 2.7 L x 11.2 W x 12.4 H centimeters |
| Width | 2.7 L x 11.2 W x 12.4 H centimeters |
| Length | 2.7 L x 11.2 W x 12.4 H centimeters |
Questions about this item
How do I confirm the Orion Motor Tech 0-100 psi sensor is reading correctly after installation?
With the engine off and the key on, the output should sit at 0.5 volts for 0 psi. At mid-range pressure it should show 2.5 volts, and at full scale 100 psi it should read 4.5 volts. A 3 millisecond response time means the voltage follows pressure changes almost instantly.
What components are included with the sensor and harness kit?
The box contains one oil pressure sensor built from 316 stainless steel with a 1/8-27 NPT thread and one cable for the 5 to 16 volt supply and 0.5 to 4.5 volt signal. IP65 rating and a 500000 cycle life are built into the sensor itself.
Which version of this transducer should I choose for a standard fuel or oil pressure gauge?
This single model covers 0 to 100 psi with a linear 0.5 to 4.5 volt output, 1/8-27 NPT threads and a 5 to 16 volt supply range. It replaces the OE transmitter for fuel, oil, air or water systems, so no other capacity or version is required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
