We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short silver adapter cable with one DisplayPort plug, two DisplayPort sockets and a Micro USB plug

Orico

Orico XD-DF2DP4 DP 1.2 MST hub 15cm 3840x2160 60Hz

SKU CH-5HKY-BHRS1

Splits one DisplayPort 1.2 signal into two 3840x2160 60 Hz outputs using a 15 cm aluminium hub powered via Micro USB

  • TypeDisplayPort to DisplayPort Cable
  • ColorBlack
  • Length15cm
  • Construction3840*2160@60Hz
  • FeaturesInput interface: DP*1, Micro USB*1;Output interface: DP*2
  • Connect two 4K monitors from one DisplayPort output
  • 15 cm cable keeps desk cabling tidy
  • Micro USB port supplies extra power for stable dual-display operation
  • Aluminium alloy housing shields signal integrity
  • Supports 3840x2160 at 60 Hz over DP 1.2

Orico DP 1.2 MST hub 15 cm

The Orico XD-DF2DP4 is a DisplayPort 1.2 MST hub that splits one DP input into two DP outputs. A Micro USB port supplies auxiliary power for stable operation. It supports 3840x2160 at 60 Hz on each connected display.

Upgrade from single-output graphics

This adapter replaces the need for a second graphics output when a GPU or laptop provides only one DisplayPort connector. The jump is worth it when you need two independent 4K 60 Hz screens from that single port without adding a discrete card.

Limits of DisplayPort 1.2 MST

Total bandwidth is shared between the two streams, so driving both outputs at 3840x2160 60 Hz consumes the full link capacity. Higher resolutions, higher refresh rates or a third display are not supported by the 1.2 standard. The 15 cm cable length also restricts placement to very close devices.

Highlights

  • Connect two 4K monitors from one DisplayPort output
  • 15 cm cable keeps desk cabling tidy
  • Micro USB port supplies extra power for stable dual-display operation
  • Aluminium alloy housing shields signal integrity
  • Supports 3840x2160 at 60 Hz over DP 1.2

Specifications

BrandORICO
ModelORICO-XD-DF2DP4
TypeDisplayPort to DisplayPort Cable
ColorBlack
Length15cm
Construction3840*2160@60Hz
FeaturesInput interface: DP*1, Micro USB*1;Output interface: DP*2

Questions about this item

How much clearance does the 15 cm cable and aluminium-alloy hub need behind the monitor?

The hub body plus the 15 cm tail require only a shallow recess behind the display; the short length keeps the bend radius tight without stressing the DP connectors.

Which port must be connected first to activate both 3840x2160 60 Hz outputs on this DP 1.2 MST hub?

Plug the Micro USB power lead in before attaching the two DisplayPort cables; the hub needs external power to drive both streams at 3840x2160 60 Hz.

When should the Micro USB power cable be replaced on this 15 cm DP 1.2 hub?

Replace the Micro USB lead if the connector feels loose or the hub drops one 3840x2160 60 Hz output intermittently, as power loss is the usual cause.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.